Siemens Communication Module Interface Link 90 x 96 x 62 mm

  • RS-stocknr. 746-5849
  • Fabrikantnummer 6GK1415-2AA10
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

SIMATIC DP/AS-Interface Link Modules

SIMATIC Net
Advanced DP/AS-Interface link
Network transition Profibus DP/AS-Interface with master profile M3, M4 ACC
Ingress protection rating of IP20

S7-300 Comms-Net-Motion-Position

SIMATIC Net communication processor and modules for connecting the SIMATIC S7-300 and ET200M to AS-Interface Configurable with STEP 7 ACCOR. AS-Interface SPEC. V3.0

Specificaties
Kenmerk Waarde
For Use With SIMATIC NET
Module Type Interface Link
Length 90mm
Width 96mm
Depth 62mm
Dimensions 90 x 96 x 62 mm
5 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
548,00
(excl. BTW)
663,08
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 548,00
Related Products
Omron's SmartSlice I/O system is compact, intelligent and ...
Description:
Omron's SmartSlice I/O system is compact, intelligent and easy. When used with Omron's CS1/CJ1 DeviceNet master units it is plug-and-work, no configuration tool is required. By using built-in functions such as pre-scaling, totalising, differentiation and alarming in analog I/O units, ...
FX3U series networking CC-Link blocks from Mitsubishi. These ...
Description:
FX3U series networking CC-Link blocks from Mitsubishi. These two CC-link V2 units FX3U-16CCL-M master block and FX3U-64CCL interface blocks are available for all FX3G and FX3U main units and enable CC-Link V2functionality for expanded cyclic transmission and programming via CC-Link. ...
Control or supervise one or several em4 via ...
Description:
Control or supervise one or several em4 via Modbus RS485. Modbus RTU or ASCII RS485 master / slave standard widely used in industryUseful to connect one or several em4 to a programmable touch panel or a SCADAThe removable connector allows ...
The EM241 Modem Module expands the functionality of ...
Description:
The EM241 Modem Module expands the functionality of the S7-200 Micro PLC into remote communications. It directly connects to the S7-200's Expansion I/O bus eliminating the need to tie up the CPU's communications port. Baud Rates are self-negotiating dependent on ...