Schneider Electric Modicon M340 Series PLC I/O Module 4 Inputs, 2 Outputs 0 → 20 mA 24 V dc

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Modicon M340 Analogue Input/Output

The BMX AMM 0600 module is a high-level analogue input/output module with 4 non-isolated voltage or current inputs and 2 non-isolated voltage (±10V) and current outputs. The module offers:

Protection of the module against overvoltages
Conversion of digital signals (11 bits or 12 bits depending on the range) to analogue signals
Conversion of application data into data that can be used by the digital/analogue converter
Module monitoring and fault indication to the application: Converter test, range overshoot test, watchdog test

For each input, the BMX AMM 0600 module offers the following ranges:

Voltage ±10V, ±5V, 0 to 10V, 0 to 5V and 1 to 5V
Current 0...20mA, 4…20mA and ±20mA, depending on the choice made during configuration

Schneider Electric Modicon M340 PLC

Equipped with astounding memory and performances, this featherweight version will inspire your applications with new momentum. Designed to operate in total synergy with other Schneider Electric devices, Modicon M340 a building block towards your total solution.

Performance

Data rate: 20kb/s to 1Mb/s (bus length dependent)
Internal RAM capacity: 4Mb (3584kb of program memory); 256kb of data memory

Compact design

3 communication ports integrated in the processor
Mounting in low depth cabinet (<150mm)
High-density discrete I/O modules with 64 channels in a 32mm wide format

Communicative, with its integrated ports

CANopen machine and installation bus
Ethernet TCP/IP network - Transparent Ready
Modbus serial link or character mode
Remote access via STN, GSM, Radio or ADSL

Expert

Counter modules with ready-to-use functions
Function block library dedicated to motion control. MF(Motion Function Blocks) to the PLCopen standard
Advanced library of process control blocks oriented towards control of machinery

Innovative and Ruggedness

USB port as standard
Embedded webserver
Recipe file management via FTP protocol
“Plug and Load” SD memory card
No batteries
Rack architecture enabling hot swapping of modules during operation (Hot-Swap)
Exceeds the standards in terms of shocks, vibrations, temperature, altitude and withstand to electrical interference.

Ruggedness

Specificaties
Kenmerk Waarde
Manufacturer Series Modicon M340 Series
Number of Inputs 4
Number of Outputs 2
Input Type Analogue
Output Type Analogue
For Use With Modicon M340
Number of I/O 6
Voltage Category 24 V dc
Output Current 0 → 20 mA
Module Type Mixed Analogue I/O Module
Length 307.6mm
Width 100mm
Depth 140mm
Dimensions 307.6 x 100 x 140 mm
Maximum Operating Temperature +60°C
Minimum Operating Temperature 0°C
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
336,31
(excl. BTW)
406,94
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 336,31
Related Products
Equipped with astounding memory and performances, this featherweight ...
Description:
Equipped with astounding memory and performances, this featherweight version will inspire your applications with new momentum. Designed to operate in total synergy with other Schneider Electric devices, Modicon M340 a building block towards your total solution. Data rate: 20kb/s to ...
BMX discrete I/O modules are standard format (1 ...
Description:
BMX discrete I/O modules are standard format (1 slot). They have a case, which ensures IP20 protection of the electronics, and are locked into postion by a captive screw. Data rate: 20kb/s to 1Mb/s (bus length dependent)Internal RAM capacity: 4Mb ...
Supplied in die-cast casings for extra durability, and ...
Description:
Supplied in die-cast casings for extra durability, and available in full height and half height modules. With the exception of the first slot (that will only accept a full height module), 1 slot within the Micro PLC rack can accommodate ...
This slave module can be used with 24Vdc ...
Description:
This slave module can be used with 24Vdc powered modular smart relays (types SR3 BxxxBD) in addition to any I/O extension fitted. Addresses available are 0-2474 inputs, 4 outputs and 4 parameter bits.