Omron NX Digital I/O Module 8 Inputs, 24 V dc, 12 x 71 x 100 mm

  • RS-stocknr. 136-2792
  • Fabrikantnummer NXID4442
  • Fabrikant Omron
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: NL
Productomschrijving

NX-ID Digital Input Units

A range of NX-ID series Digital input units from Omron. These NX-ID digital I/O units are for high-speed synchronous control & general purpose and selectable synchronous I/O refreshing or free run refreshing is possible by connecting with the EtherCAT coupler. The digtal I/O units are available with 4 or 8 digital inputs. All digital I/O units are reliable and excellent quality

Features & Benefits

High-speed I/O refreshing is possible by connecting with the EtherCAT Coupler. I/O refreshing can be synchronized with the control cycle of the Controller. (Synchronous refreshing)
ON/OFF response time of the high-speed model is 100 μs max, which enables high-speed, high-precision control.
The removable screwless terminal block improves maintenance.
Screw-less clamp terminal block significantly reduces wiring work.
12-mm-wide unit can save space.
The lineup including 4-point, 8-point, and 16-point types enables ideal system configuration for your system.

Omron NX Series

Specificaties
Kenmerk Waarde
Manufacturer Series NX
Number of Inputs 8
Input Type Digital
For Use With CJ PLC, EtherCAT Coupler Unit, NX Series CPU Unit
Number of I/O 8 (Input)
Voltage Category 24 V dc
Module Type DC Input
Length 12mm
Width 71mm
Depth 100mm
Dimensions 12 x 71 x 100 mm
Application Communication
Supply Voltage 24 V dc
Special Features Detachable Terminals for Easy Maintenance, High-Speed I/O Refreshing Using EtherCAT Couple
Input Current 3.5mA
Connection to Host Connector
Minimum Operating Temperature 0°C
Mounting Type Panel Mount
Maximum Operating Temperature +55°C
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
5 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
77,40
(excl. BTW)
93,65
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 77,40
Related Products
A variety of Plug-in modules that can be ...
Description:
A variety of Plug-in modules that can be used with DIRIS A40 series energy meters. The plug-in modules allow flexible customisation with a range of options depending on the model. • Pulse outputs (405-6170)• RS485 MODBUS communication (405-6192)• Analogue outputs ...
NX series IO-Link master unit form Omron. The ...
Description:
NX series IO-Link master unit form Omron. The IO-Link makes communication down to sensor level information visible and the screwless clamping terminal block reduces wiring work. Machine downtime can be reduced Abnormality detection for shortest recovery Condition monitoring for predictive ...
The connected device may directly communicate over the ...
Description:
The connected device may directly communicate over the fieldbus coupler with the control unit. The active communication channel works independently of the higher-level fieldbus system and allows full duplex operation up to 19200 baud. Remote I/O modular system for all ...
The Allen Bradley digital expansion module is designed ...
Description:
The Allen Bradley digital expansion module is designed for use with SLC 500 PLCs. It has 16 channels that accept digital input sinking current of 8mA at 24VDC. Single common for all inputs8ms response time off to on and on ...