Turck PLC I/O Module 1 Inputs, 1 Outputs 40mA 24V dc, 54 x 41 x 24mm

  • RS-stocknr. 175-9855
  • Fabrikantnummer USB-2-IOL-0002
  • Fabrikant Turck
Wetgeving en compliance
Land van herkomst: DE

Turck IO-Link

The Turck IO-link is a PLC I/O module with 1.6A input current and 40mA output current. IO-Link devices are easily put into operation with the IO-Link master 1.1. Commissioning of IO-Link devices, reading of process data (PD) and reading/writing of specified service data (SD) is possible, independently from the higher level control. Pin4 (C/Q) of the IO-Link master can be operated either in the IO-Link mode (IOL) or in the standard IO mode (SIO), depending on the DTM parametrization. The possible transmission rates are 4.8kbps (COM1), 38.4kbps (COM2) and 230.4kbps (COM3). Depending on the connected IO-link device, data backup via an integrated parametrizing server is also supported. This device is designed for serial communication purpose. IO-Link devices are directly supplied via the integrated mini USB port. In the event of increased current consumption, the connected devices should be supplied by the external plug-in power unit.

Features and Benefits

• Alternatively via plug-in power supply
• Commissioning of IOL devices
• Compact aluminium housing
• Control environment not required
• Integrated M12 x 1 connection
• Integrated USB-B port
• Parametrization via FDT/DTM
• Power supply via USB-B
• Transmission of process data
• Transmission of service data
• USB compatible IO-Link master


• Communication


• IP40

Kenmerk Waarde
Number of Inputs 1
Number of Outputs 1
For Use With IO-Link Master
Number of I/O 1
Voltage Category 24 V dc
Output Current 40 mA
Module Type Serial Communication
Length 54mm
Width 41mm
Depth 24mm
Dimensions 54 x 41 x 24 mm
Maximum Operating Temperature +55°C
Input Current 1.6A
Mounting Type Cable Mount
Supply Voltage 24 V dc
Application Communication
Minimum Operating Temperature -5°C
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 312,78
Related Products
These modules convert digital PLC values into 2 ...
These modules convert digital PLC values into 2 independent channels of analogue voltage or current outputs. 16 bit resolutionFast conversion rate improves controlBuilt-in EEPROM for storing set-up dataOnly occupies 16 PLC I/O points, great for compact systemsOutput short circuit protection ...
NX series IO-Link master unit form Omron. The ...
NX series IO-Link master unit form Omron. The IO-Link makes communication down to sensor level information visible and the screwless clamping terminal block reduces wiring work. Machine downtime can be reduced Abnormality detection for shortest recovery Condition monitoring for predictive ...
132 with screw/spring terminal digital I/O244 with HE10 ...
132 with screw/spring terminal digital I/O244 with HE10 type connector digital I/O48 analogue I/O (24 input/24 output channels). 3 Communication base modules each with 20 I/O Expandable using 8 to 32 channel I/O modules (up to 264 channels)Wide range of ...
Digital input and outputs for the ET 200SConnect ...
Digital input and outputs for the ET 200SConnect to terminal modules TM-E with automatic encryptionHigh-spec version for increased system availability, additional functionality and extensive diagnosticsModule exchange during operation subject to voltage (hot swapping).