Wago I/O SYSTEM 750 PLC I/O Module 2 (Channel) Inputs, , 100 x 12 x 64 mm

  • RS-stocknr. 508-3943
  • Fabrikantnummer 750461
  • Fabrikant Wago
Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: DE
Productomschrijving

Wago I/O system Analogue Inputs

Analogue input terminals for connecting temperature sensors or any 4-20 mA inputs
Fast Cage Clamp® connection system
Electrical supply through the coupler
Easy identification by green colour coding

Wago PLC I/O Module

The Wago PLC I/O is a 4-channel analogue inputs module. It has analogue input terminals for connecting temperature sensors with inputs ranging between 4mA and 20mA. This module automatically linearizes the entire temperature range. It also indicates a sensor error by a red LED. A green LED indicates readiness for operation and error-free communication with the bus coupler. The screen is directly connected to the DIN rail. The module is compatible with 750 series PLCs.

Features and Benefits

• Error indication by LED
• Input module directly connects to Pt resistance sensors
• Measuring error ranges between0.5K and 3.0K
• Operating temperature ranges between 0°C and 55°C

Certifications

• CE
• IP20 rated
• IEC 61131-2
• UL 121201
• IEC 60079-0
• EN 60079-0

Wago I/O system range

Remote I/O modular system for all functions.
Makes it easier to connect all I/Os thanks to its Cage clamp system®
Communication with PC, PLCs thanks to the various communication protocols.
Colour codes according to type of signal.
Do not forget to order the end module (508-3959)

Specificaties
Kenmerk Waarde
Manufacturer Series I/O SYSTEM 750
Number of Inputs 2 (Channel)
Input Type Analogue
For Use With 750 Series
Module Type Input Module
Length 100mm
Width 12mm
Depth 64mm
Dimensions 100 x 12 x 64 mm
9 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
238,78
(excl. BTW)
288,92
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 238,78
Related Products
Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, ...
Description:
Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also ...
Omron's SmartSlice I/O system is compact, intelligent and ...
Description:
Omron's SmartSlice I/O system is compact, intelligent and easy. When used with Omron's CS1/CJ1 DeviceNet master units it is plug-and-work, no configuration tool is required. By using built-in functions such as pre-scaling, totalising, differentiation and alarming in analog I/O units, ...
This module converts 4 independent channels of analogue ...
Description:
This module converts 4 independent channels of analogue voltage or current input into digital PLC values. 16 Bit ResolutionFast conversion rate improves controlBuilt-in EEPROM for storing set-up dataOnly occupies 16 PLC I/O points, great for compact systemsDepth 90mm Height 98mm ...
Digital input and outputs for the ET 200SConnect ...
Description:
Digital input and outputs for the ET 200SConnect to terminal modules TM-E with automatic encryptionHigh-spec version for increased system availability, additional functionality and extensive diagnosticsModule exchange during operation subject to voltage (hot swapping).