Siemens ET200S PLC I/O Module 24 V dc, 119.5 x 60 x 75 mm

  • RS-stocknr. 662-3678
  • Fabrikantnummer 6ES7151-3AA23-0AB0
  • Fabrikant Siemens
Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: DE
Productomschrijving

ET 200S — IM 151-3PN Interface Module

Interface module to connect ET 200S to PROFINET
Transfer rate up to 100 Mbit/s
Performs complete data transfer with the PROFINET I/O Controller
With integrated 2-port switch for linear installation
Connection module included
An MMC is required for operation

Siemens Interface Module

The Siemens ET200S PLC I/O module is a 2X bus interfacing using RJ45. This electronic module enables electronic or mechanical motor starter modules to be connected to ET 200S PLCs through PROFINET. It requires SIMATIC MMC for using without battery.

Features and Benefits

• Transfer rate is up to 100Mbit/s max
• Performs complete data transfer with the PROFINET I/O Controller
• With integrated 2-port switch for linear installation
• Connection module included

Applications


Industrial automation
• Robotics
• Automobiles industry

Certifications


ANSI/ESD S20.20:2014
• BSEN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Manufacturer Series ET200S
For Use With ET200S Series
Voltage Category 24 V dc
Module Type Interface Module
Length 119.5mm
Width 60mm
Depth 75mm
Dimensions 119.5 x 60 x 75 mm
3 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
675,00
(excl. BTW)
816,75
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 675,00
Related Products
A range of digital and analogue expansion modules ...
Description:
A range of digital and analogue expansion modules to increase the I/O capacity of the S7-200 CPUs. A maximum of 2 modules can be used with S7-222, with a maximum of 78 I/O, up to 7 modules may be used ...
Used to interface between a S7-22X CPU and ...
Description:
Used to interface between a S7-22X CPU and a Profibus DP networkCan be simultaneously operated as MPI and DP slaveMPI protocol enables simultaneous data exchange with MPI mastersAllows an S7-200 CPU to be connected to a Profibus DP or MPI ...
The Millenium 3 is the latest generation in ...
Description:
The Millenium 3 is the latest generation in the Millenium series. Improvements over the Millenium 2 Plus include:. May be used with expandable controllers, but not with expansion extension units.
The device has 2 channels which can be ...
Description:
The device has 2 channels which can be parameterised as inputs or outputs by selecting the application ETS2 programUsing the colour-coded connecting cables, it is possible to connect conventional push buttons, potentialfree contacts or LEDsThe scanning voltage for the contacts ...