Wago 750 Interface Unit, 100 x 24 x 70.5 mm

  • RS-stocknr. 882-0335
  • Fabrikantnummer 750-642
  • Fabrikant Wago
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

EnOcean Radio Receiver Module

The 750-642 I/O Module receives radio telegrams from maintenance-free, battery-less and wireless switches and sensors based on EnOcean radio technology.
The module can be used with any controller of the WAGO-I/O-SYSTEM 750. Preprogrammed function blocks make integration easy. The energy required for switch or sensor operation is produced by converting one type of energy (heat, solar or mechanical energy) into usable electrical energy. The radiated energy from the transmitter modules is around one million times smaller than mobile phones. Almost any number of sensors is possible.


EnOcean Radio Receiver Module
Maximum 100 transmitter per module
Connection distances up to 300 m with an external antenna
Short transmission time, high level of protection against external interference
Diagnostic functions
LED status LEDs
Power supply via system voltage Vac/dc

Wago I/O system range

Remote I/O modular system for all functions.
Makes it easier to connect all I/Os thanks to its Cage clamp system®
Communication with PC, PLCs thanks to the various communication protocols.
Colour codes according to type of signal.
Do not forget to order the end module (508-3959)

Specificaties
Kenmerk Waarde
Manufacturer Series 750
Input Type Voltage
Output Type Transmitter
For Use With 750 Series
Length 100mm
Width 24mm
Depth 70.5mm
Dimensions 100 x 24 x 70.5 mm
Maximum Operating Temperature +55°C
Application Communication
Input Current 80mA
Minimum Operating Temperature 0°C
Mounting Type DIN Rail
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24-12-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
382,42
(excl. BTW)
462,73
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 382,42
Related Products
The Easy 800 intelligent relays offer a wide ...
Description:
The Easy 800 intelligent relays offer a wide set of features and much greater functionality than the standard intelligent relay. Networking capability enables systems up to 300 I/O to be controlled using distributed intelligence architecture. For short runs this is ...
Analogue input terminals for connecting temperature sensors or ...
Description:
Analogue input terminals for connecting temperature sensors or any 4-20 mA inputsFast Cage Clamp® connection systemElectrical supply through the couplerEasy identification by green colour coding.
Range of couplers for analogue and digital signals.Enables ...
Description:
Range of couplers for analogue and digital signals.Enables I/O connection to various protocols Modbus, Ethernet, Profibus and Interbus.Configuration simplified with switches or rotary encoders.The joint should be connected to the end of the loop, to guarantee correct transmission of the ...
The connected device may directly communicate over the ...
Description:
The connected device may directly communicate over the fieldbus coupler with the control unit. The active communication channel works independently of the higher-level fieldbus system and allows full duplex operation up to 19200 baud. Remote I/O modular system for all ...