Wago PLC Programming Software for use with I/O Modules for Windows 2000 or Higher

  • RS-stocknr. 667-9255
  • Fabrikantnummer 759-302
  • Fabrikant Wago
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

WAGO-I/O-CHECK - Commissioning Tool For WAGO-I/O-SYSTEM 750

WAGO-I/O-CHECK is an easy-to-use Windows application for operating and displaying a WAGO-I/O-SYSTEM 750 node without connecting the node to a fieldbus system.
The software reads the configuration from the node and displays it as an on-screen graphic. The graphic can be printed together with a configuration list as documentation.
With WAGO-I/O-CHECK, it is possible to display and determine the process data of the bus modules. The field wiring, including all sensors and actuators, can thus be checked before startup.
Application-specific settings, such as the baud rate or sensor types, can be made with select interface, Pt100 and thermocouple modules. For communicating between WAGO-I/O-CHECK and the node, the coupler must be connected at a PC’s vacant serial or USB port using the communication cable supplied in the kit with the system.


The kit contain the software and a cable
Software is on a CD-ROM
Running with Windows XP and Windows 7

The tool is available as
- RS-232 Kit, stock no. 667-9255
- USB Kit, stock no. 882-0338

Wago I/O system range

Remote I/O modular system for all functions.
Makes it easier to connect all I/Os thanks to its Cage clamp system®
Communication with PC, PLCs thanks to the various communication protocols.
Colour codes according to type of signal.
Do not forget to order the end module (508-3959)

Specificaties
Kenmerk Waarde
For Use With I/O Modules
Operating System Windows 2000 or Higher
Media Included CD
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
180,67
(excl. BTW)
218,61
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 180,67
Related Products
The Sysmac studio installation DVD gives you an ...
Description:
The Sysmac studio installation DVD gives you an introduction about the components, installation/uninstallation, user registration and auto update of the sysmac studio. The License agreement gives you the usage conditions and warranty for the sysmac studio. The lite edition license ...
SIMATIC STEP 7 Basic V15.1; Floating License; Engineering ...
Description:
SIMATIC STEP 7 Basic V15.1; Floating License; Engineering Software in TIA Portal; SW and documentation on DVD; license key on USB flash drive; Class A; 6 languages: de,en,fr,es,it,zh; Executable in Windows 7 (64-bit), Windows 10 (64-bit), Windows Server 2012R2 (64-bit), ...
SIMATIC STEP 7 Basic V15.1; Upgrade V11..V14 - ...
Description:
SIMATIC STEP 7 Basic V15.1; Upgrade V11..V14 - V15.1 Floating License; Engineering Software in TIA Portal; SW and documentation on DVD; License key on USB flash drive; Class A; 6 languages: de,en,fr,es,it,zh; Executable in Windows 7 (64-bit), Windows 10 (64- ...
The Siemens SIMATIC STEP 7 Professional V15 is ...
Description:
The Siemens SIMATIC STEP 7 Professional V15 is a engineering Software in the TIA Portal also applies for upgrade from V11 Single licenses. License keys on USB flash drive SIMATIC Basic Panels.