Schneider Electric Modicon M340 Backplane 4 Slots, DIN Rail Mount 242.4 x 103.7 x 19 mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Modicon M340 Racks

BMX XBPpp00 racks are the basic element of the Modicon M340 automation platform in a single-rack configuration.,These racks perform the following functions:

Mechanical function:

They are used to install all the modules in a PLC station (power supply, processor, discrete I/O, analog and application-specific I/O). These racks can be mounted on a panel, plate or DIN rail:

Inside enclosures
On machine frames, etc.

Electrical function:

Distribute the power supplies required for each module in the same rack
Distribute data and service signals for the entire PLC station
Hot swap modules during operation

The racks incorporate a Bus X. They are used to:

Specificaties
Kenmerk Waarde
Manufacturer Series Modicon M340
For Use With Modicon M340
Module Slots 4
Mounting Type DIN Rail
Weight Unloaded 0.630kg
Length 242.4mm
Width 103.7mm
Depth 19mm
Minimum Operating Temperature 0°C
Maximum Operating Temperature +60°C
Dimensions 242.4 x 103.7 x 19 mm
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
145,64
(excl. BTW)
176,22
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 145,64
Related Products
Standard and Performance processors from the Modicon M340 ...
Description:
Standard and Performance processors from the Modicon M340 automation platform manage an entire PLC single-rack station on which a maximum of 11 slots can be equipped with:. Discrete I/O modulesAnalog I/O modulesApplication-specific modules (counter, Ethernet TCP/IP communication).
The Modicon TSX Micro PLC range offers a ...
Description:
The Modicon TSX Micro PLC range offers a selection of PLC base units, either complete with I/O or configurable by the user. Up to 256 I/O may be configured with full or half format I/O modules to closer match the ...
Common features for TSX37-21 and -22:. 3 slot ...
Description:
Common features for TSX37-21 and -22:. 3 slot rack (expandable to 5 slots with mini extension rack)Slot reserved for standard format moduleCentralised display blockTerminal portHMI portPCMCIA memory expansion port (32//64 and 128 kwords)20kwords RAM memoryPCMCIA communications portMax. I/O: 160 (with ...
The Main Base Unit is used for holding ...
Description:
The Main Base Unit is used for holding and coupling CPU’s, power supply module’s, input modules, output modules and special function modules. The modules are automatically addressedThe units are mounted by means of screws or on a profiled rail with ...