Schneider Electric TSX 37 PLCs 3 Slots, Panel Mount Mount 151 x 341.4 x 152 mm

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

TSX37-21 & -22 PLC

Common features for TSX37-21 and -22:

3 slot rack (expandable to 5 slots with mini extension rack)
Slot reserved for standard format module
Centralised display block
Terminal port
HMI port
PCMCIA memory expansion port (32//64 and 128 kwords)
20kwords RAM memory
PCMCIA communications port
Max. I/O: 160 (with screw terminals), 248 (with HE10 connectors) expandable to 236 (screw terminal) and 328 (HE10 connector) with nano remote I/O
Max. I/O expandable to 376 (screw terminal) and 468 (HE10 connector) with remote I/O on AS-I bus

TSX37-22 additional features:

8 analogue inputs, and 1 analogue output integrated into the rack
Connectors for integrated analogue and counter functions
10kHz up/down fast counter integrated into the rack
10kHz up counting fast counter integrated into the rack

Schneider Electric Modicon TSX Micro

The Modicon TSX Micro PLC range offers a selection of PLC base units, either complete with I/O or configurable by the user. Up to 256 I/O may be configured with full or half format I/O modules to closer match the application requirements of the user. Options include: multi-range 16-bit analogue modules, integrated safety relay modules, AS-i master modules, multi-protocol communication and modem cards using PCMCIA technology, and expandable memory. IEC 1131-3 Windows™ - based programming software enables programming in Ladder Logic (LD), Instruction List (IL) or Sequential Flow Chart (SFC) languages. When using the Telefast prewired cabling system in place of wiring the PLC to terminals in a control panel, significant time and expense may be saved on the installation cost of the PLC.,TSX37-08 PLC's are delivered complete with I/O and offer the flexibility of a full spare slot for further expansion. TSX37-21 PLC's offer the flexibility of full user-configuration, have a dual programming port for simultaneous connection of the HMI and programming equipment, PCMCIA memory expansion and communication ports, and the ability to add an expansion rack. All units offer the following:

Diecast backplate suitable for DIN rail mounting or screw fixing
Relay output
400mA, 24Vdc sensor supply on ac powered units
Solid rack with I/O module guides
Memory configurable for program or data (size dependant on unit)
Up to 16 event tasks
Up to 16 PID loops
ASCII, Uni-Telway or Modbus Slave communication via programming port
Dimensions: H 151 x W 227.9 x D 108.3mm

Specificaties
Kenmerk Waarde
Manufacturer Series TSX 37
For Use With TSX Series
Module Slots 3
Maximum Backplane Current 60A
Mounting Type Panel Mount
Weight Unloaded 1.72kg
Length 151mm
Width 341.4mm
Depth 152mm
Minimum Operating Temperature 0°C
Maximum Operating Temperature +60°C
Dimensions 151 x 341.4 x 152 mm
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
The AE95 electrical/mechanical buzzers from Moflash are suitable ...
Description:
The AE95 electrical/mechanical buzzers from Moflash are suitable for a wide range of industrial signalling applications where a low frequency and penetrating audible signal is required. Typical applications would be for industrial (stop/start & time signalling, etc) and automotive applications ...
The Easy Multi Function Display (MFD) offers the ...
Description:
The Easy Multi Function Display (MFD) offers the combination of professional intelligent Relay and HMI operator display. With a much greater functionality than the standard intelligent relay, the Easy MFD will interface with the Easy 800 system allowing systems up ...
The component is an Ethernet patch panel for ...
Description:
The component is an Ethernet patch panel for DIN rail mounting. It represents the transition of the field cabling to the internal control cabinet cabling. The connection from the patch panel to the end device is ensured with a prefabricated ...
Standard and Performance processors from the Modicon M340 ...
Description:
Standard and Performance processors from the Modicon M340 automation platform manage an entire PLC single-rack station on which a maximum of 11 slots can be equipped with:. Discrete I/O modulesAnalog I/O modulesApplication-specific modules (counter, Ethernet TCP/IP communication).