Metric Plunger Dial Indicator, 0 → 12 mm Measurement Range, 0.01 mm Resolution , ±0.003 mm Accuracy With UKAS

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

ABSOLUTE DIGIMATIC indicator ID-C

Easy-to-read indicator with full-size digits.
GO/NG tolerance display.
Unlimited response speed eliminates spindle over-speed errors.
Functions: power ON/OFF, ZERO/ABS switching, data output, tolerance limit setting, PRESET, counting direction switching.
Resolution: 0.001mm/0.01mm
Accuracy: 0.003 mm.
Measuring force less than 1.5 N.

Specificaties
Kenmerk Waarde
Maximum Measurement 12mm
Accuracy ±0.003 mm
Resolution 0.01 mm
Calibrated UKAS
SPC Data Output Yes
Zero Resettable Yes
Measurement Range 0 → 12 mm
Imperial or Metric Metric
Battery Operated Yes
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each
436,79
(excl. BTW)
528,52
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 436,79
Related Products
The Mitutoyo 513 series horizontal lever indicator has ...
Description:
The Mitutoyo 513 series horizontal lever indicator has a dial reading of 0-40-0 and a maximum resolution of 0.01mm. It is professional, non-magnetic type measuring instrument that can reach places conventional indicators cannot. The non-magnetic pointer and contact point permit ...
Comparing element for hard-to-reach elements, adjustment of machine ...
Description:
Comparing element for hard-to-reach elements, adjustment of machine tools and comparative measurements.High sensitivity and immediate response time thanks to ruby bearings.Automatic inversion sensing lever, anti-reflective, scratch-resistant glass, tungsten carbide switch lever and dovetailed attachment.Available ...
Dial rotates 360 degrees5 button operation Inch/metric conversion; ...
Description:
Dial rotates 360 degrees5 button operation Inch/metric conversion; ABS/set; Zero/ONTolerance/directionRan. Run-Out mode Value Change: 0.003mm / 0.00012inDigital fan for run-out viewingMax speed: 0.6m/sMeasuring force: 1.5NCentre lug back8mm stem with anvil thread M2.5DIN 878Power: 1 x 3V CR2032 Lithium Battery.
Vertical or horizontal position Dial rotates 90° either ...
Description:
Vertical or horizontal position Dial rotates 90° either side of vertical positionLCD display with large 12.5mm digitsTravel: 12.5mm / 0.5in Repeatability: 0.01mm / 0.0005in3 button operation: ON/OFF, Metric/Inch conversion, Zero resetMeasuring speed: 1.5m/sFitted with Lug Back Ball anvil measuring tip ...