Mitutoyo 543-474BMetric Plunger Dial Indicator, 0 → 25.4 mm Measurement Range, 0.01 mm Resolution , 0.02 mm

  • RS-stocknr. 794-3594
  • Fabrikantnummer 543-474B
  • Fabrikant Mitutoyo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

ABSOLUTE DIGIMATIC indicator ID-C

Easy-to-read indicator with full-size digits.
GO/NG tolerance display.
Unlimited response speed eliminates spindle over-speed errors.
Functions: power ON/OFF, ZERO/ABS switching, data output, tolerance limit setting, PRESET, counting direction switching.
Resolution: 0.001mm/0.01mm
Accuracy: 0.003 mm.
Measuring force less than 1.5 N.

Specificaties
Kenmerk Waarde
Maximum Measurement 25.4mm
Accuracy 0.02 mm
Resolution 0.01 mm
SPC Data Output Yes
Zero Resettable Yes
Measurement Range 0 → 25.4 mm
Imperial or Metric Metric
Metric-Imperial Conversion Yes
Battery Operated Yes
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
Was € 462,60
420,00
(excl. BTW)
508,20
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 420,00
Kalibratie-opties
Related Products
The Mitutoyo 513 series horizontal lever indicator has ...
Description:
The Mitutoyo 513 series horizontal lever indicator has a dial reading of 0-40-0 and a maximum resolution of 0.01mm. It is professional, non-magnetic type measuring instrument that can reach places conventional indicators cannot. The non-magnetic pointer and contact point permit ...
Comparing element for hard-to-reach elements, adjustment of machine ...
Description:
Comparing element for hard-to-reach elements, adjustment of machine tools and comparative measurements.High sensitivity and immediate response time thanks to ruby bearings.Automatic inversion sensing lever, anti-reflective, scratch-resistant glass, tungsten carbide switch lever and dovetailed attachment.Available ...
Dial rotates 360 degrees5 button operation Inch/metric conversion; ...
Description:
Dial rotates 360 degrees5 button operation Inch/metric conversion; ABS/set; Zero/ONTolerance/directionRan. Run-Out mode Value Change: 0.003mm / 0.00012inDigital fan for run-out viewingMax speed: 0.6m/sMeasuring force: 1.5NCentre lug back8mm stem with anvil thread M2.5DIN 878Power: 1 x 3V CR2032 Lithium Battery.
Vertical or horizontal position Dial rotates 90° either ...
Description:
Vertical or horizontal position Dial rotates 90° either side of vertical positionLCD display with large 12.5mm digitsTravel: 12.5mm / 0.5in Repeatability: 0.01mm / 0.0005in3 button operation: ON/OFF, Metric/Inch conversion, Zero resetMeasuring speed: 1.5m/sFitted with Lug Back Ball anvil measuring tip ...