Mitutoyo 543-505BMetric Plunger Dial Indicator, 0 → 12.7 mm Measurement Range, 0.01 mm Resolution , 0.02 mm

  • RS-stocknr. 794-5685
  • Fabrikantnummer 543-505B
  • Fabrikant Mitutoyo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Digimatic Series 543 IDC ABS

Large LCD display
Imperial/Metric conversion
ABSolute feature
Preset
Tolerance setting
Data output
Magnified judgement results
Preset (e.g. unit can display 0-12.7 or 300-312.7mm)
330° bezel rotation

Specificaties
Kenmerk Waarde
Maximum Measurement 12.7mm
Accuracy 0.02 mm
Resolution 0.01 mm
SPC Data Output Yes
Calibrated UKAS
Zero Resettable Yes
Measurement Range 0 → 12.7 mm
Imperial or Metric Metric
Metric-Imperial Conversion Yes
Battery Operated Yes
1 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
Was € 229,30
212,11
(excl. BTW)
256,65
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 212,11
Related Products
Comparing element for hard-to-reach elements, adjustment of machine ...
Description:
Comparing element for hard-to-reach elements, adjustment of machine tools and comparative measurements.High sensitivity and immediate response time thanks to ruby bearings.Automatic inversion sensing lever, anti-reflective, scratch-resistant glass, tungsten carbide switch lever and dovetailed attachment.Available ...
Easy-to-read indicator with full-size digits.GO/NG tolerance display.Unlimited response ...
Description:
Easy-to-read indicator with full-size digits.GO/NG tolerance display.Unlimited response speed eliminates spindle over-speed errors.Functions: power ON/OFF, ZERO/ABS switching, data output, tolerance limit setting, PRESET, counting direction switching. Resolution: 0.001mm/0.01mmAccuracy: 0.003 mm.Measuring force ...
Dial rotates 360 degrees5 button operation Inch/metric conversion; ...
Description:
Dial rotates 360 degrees5 button operation Inch/metric conversion; ABS/set; Zero/ONTolerance/directionRan. Run-Out mode Value Change: 0.003mm / 0.00012inDigital fan for run-out viewingMax speed: 0.6m/sMeasuring force: 1.5NCentre lug back8mm stem with anvil thread M2.5DIN 878Power: 1 x 3V CR2032 Lithium Battery.
Vertical or horizontal position Dial rotates 90° either ...
Description:
Vertical or horizontal position Dial rotates 90° either side of vertical positionLCD display with large 12.5mm digitsTravel: 12.5mm / 0.5in Repeatability: 0.01mm / 0.0005in3 button operation: ON/OFF, Metric/Inch conversion, Zero resetMeasuring speed: 1.5m/sFitted with Lug Back Ball anvil measuring tip ...