G 1/8 Hydraulic Banjo Compression Tube Fitting, 20 bar Max Operating Pressure

  • RS-stocknr. 460-2307
  • Fabrikantnummer 3527 00 10
  • Fabrikant Legris
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Banjo Bolts/Bodies

Adaptors for connecting pneumatic hose at right-angles.

Bolts made from zinc-passivated steel and plastic bodies
Nitrile ’O’ rings
Max operating pressure 20 bar
Temperature range -20 to 80°C

Note

Please note that bolts and bodies to make up the complete fitting have to be purchased seperately.

Specificaties
Kenmerk Waarde
Material Brass, Nitrile Rubber
Finish Nickel Plated (Sub Base)
Maximum Operating Pressure 20 bar
Minimum Operating Temperature -20°C
Maximum Operating Temperature +80°C
10 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
2,992
(excl. BTW)
3,62
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
€ 2,992
€ 14,96
25 - 45
€ 2,902
€ 14,51
50 +
€ 2,81
€ 14,05
*prijsindicatie
Related Products
These fittings incorporate parallel threads with a pre-assembled ...
Description:
These fittings incorporate parallel threads with a pre-assembled sealing washer, giving instant assembly, security and consistent assembled height. Compact and low profile these banjos give better space utilisation and accessibility. Nitrile ’O’ ringsMax operating pressure 20 barTemperature range -20 to ...
The high-pressure banjo elbow from Parker has a ...
Description:
The high-pressure banjo elbow from Parker has a BSP parallel thread with port sealing achieved by a hardened sealing ring. • EO 24° cone end/ male BSPP thread with metal sealing ring• Steel, zinc plated, Cr(VI) free• NBR standard seal• ...
The air operated switch system offers enhanced safety ...
Description:
The air operated switch system offers enhanced safety in hazardous areas by allowing remote operation of electrical circuits. The actuator is a bellows which, when compressed moves air down the air tubing to the switch element. This compressed air then ...
Integral push in fitting connections for fast inline ...
Description:
Integral push in fitting connections for fast inline installation. These fittings are compact and lightweight with the advantage of one-touch fitting. Easily installed into your pneumatic installations. • Can be used in compressed air or vacuum lines• Suitable for use ...