Festo Pneumatic Cylinder 40mm Bore, 10mm Stroke, AEVC Series, Single Acting

  • RS-stocknr. 121-5498
  • Fabrikantnummer AEVC-40-10-I-P
  • Fabrikant Festo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

AEVC Series Single Acting Cylinder

FESTO AEVC series of single acting compact short stroke pneumatic cylinder are up to 60% smaller than standard pneumatic cylinders. Providing maximum productivity in confined spaces. The extensive range of stroke length and bore size variants in the AEVC series are the ideal choice for clamping or applications where installation space is limited.

Pneumatic Cylinder Operation
The AEVC series is a single acting actuator with air applied to extend and a spring return piston. Magnetic piston rods allow contactless position detection via a proximity sensor mounted in slots along the cylinder body.

Cylinders are fitted with flexible polymer end cushioning helping to reduce noise and vibration, prolong service life and increase production and productivity.

Features and Benefits

Single acting cylinder with piston rod
Slots for flush mounting proximity sensors
Low friction design allowing for continuous operation
Versatile mounting hole pattern to VDMA 24562
Cushioning requires no adjustment saving maintenance time and cost
Can be used in systems with lubricated air

How do I mount the pneumatic cylinder?

The AEVC series pneumatic actuators can be mount horizontally or vertically to suit the required application. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.

FESTO Short Stroke Cylinders

Specificaties
Kenmerk Waarde
Stroke 10mm
Bore 40mm
Action Single
Manufacturer Series AEVC
Pneumatic Connection G 1/8
Piston Rod Thread Gender Female
Dimensions 53.5 x 53.5 x 35.5mm
Length 35.5mm
Width 53.5mm
Height 53.5mm
Maximum Operating Pressure 10 bar
Minimum Operating Temperature -20°C
Maximum Operating Temperature +80°C
1 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
67,93
(excl. BTW)
82,20
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 67,93
5 +
€ 65,21
Related Products
ISO Standard compact cylinder with hard anodized aluminium ...
Description:
ISO Standard compact cylinder with hard anodized aluminium body. Available as double acting with magnetic piston as standard. ISO standard 21287CompactMagnetic sensing.
Anodised aluminium alloy cylinders for filtered air; lubricated ...
Description:
Anodised aluminium alloy cylinders for filtered air; lubricated or non-lubricatedMaximum pressure: 10 barFixing via through-holes.
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
SMC SV Series employ multi-pin connectors in place ...
Description:
SMC SV Series employ multi-pin connectors in place of conventional lead wires within manifold blocks. The design of the connector-type manifold enables any changes within the manifold station to be greatly simplified. Cassette base type manifolds offer the ultimate in ...