Festo Pneumatic Cylinder 40mm Bore, 15mm Stroke, ADN Series, Double Acting

  • RS-stocknr. 121-5763
  • Fabrikantnummer ADN-40-15-I-P-A
  • Fabrikant Festo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

ADN ISO 21287 Pneumatic Cylinders- Flexible Cushioning

FESTO ADN series of compact pneumatic cylinder are up to 50% smaller than standard pneumatic cylinders for maximum productivity in confined spaces. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod. The extensive range of stroke length and bore size variants in the ADN series can be configured to suit a broad range of applications.

Pneumatic Cylinder Operation
The ADN series is a double acting actuator with air applied to extend and to retract the piston in a linear motion to the desired stroke length. Magnetic piston rods allow contactless position detection via a proximity sensor mounted in slots along the cylinder body.

Cylinders are fitted with flexible polymer end cushioning helping to reduce noise and vibration, prolong service life and increase production and productivity.

Features and Benefits

Complies with ISO 21287 standard
Slots for flush mounting proximity sensors
Low friction design allowing for continuous operation
Cushioning requires no adjustment saving maintenance time and cost

How do I mount the pneumatic cylinder?

The ADN series pneumatic actuators can be mount horizontally or vertically to suit the required application. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.

FESTO ADN Series

Specificaties
Kenmerk Waarde
Stroke 15mm
Bore 40mm
Action Double
Manufacturer Series ADN
Pneumatic Connection G 1/8
Piston Rod Thread Gender Female
Dimensions 54.5 x 54.5 x 66.1mm
Length 66.1mm
Width 54.5mm
Maximum Operating Pressure 10 bar
Height 54.5mm
Maximum Operating Temperature +80°C
Minimum Operating Temperature -20°C
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
73,09
(excl. BTW)
88,44
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 73,09
5 +
€ 70,17
Related Products
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
SMC SV Series employ multi-pin connectors in place ...
Description:
SMC SV Series employ multi-pin connectors in place of conventional lead wires within manifold blocks. The design of the connector-type manifold enables any changes within the manifold station to be greatly simplified. Cassette base type manifolds offer the ultimate in ...
Motor side nut used to secure motor side ...
Description:
Motor side nut used to secure motor side foot to cylinderRod side nut used to secure rod side foot to cylinderMounting band & switch holder to hold reed sensor in positionSuitable sensors are D-M9PL and D-M9NL in the pneumatics cylinder ...
SMC Dual-Rod Cylinders with slide bearings (CXSM type) ...
Description:
SMC Dual-Rod Cylinders with slide bearings (CXSM type) or ball bearing slides (CXSL type), suitable for 'pick-and-place' applications, operating with non-lubricated, filtered, compressed air. Dual-Rod Cylinders feature high non-rotational accuracy, dual port locations, and standard magnetic sensing and buffer ...