Parker Pneumatic Compact Cylinder 20mm Bore, 4mm Stroke, C05 Series, Single Acting

  • RS-stocknr. 449-4853
  • Fabrikantnummer C05S-20-10-4
  • Fabrikant Parker
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Parker Hannifin CO5 Series Cylinders

Single and double-acting compact short-stroke cylinders, operating with lubricated or non-lubricated filtered compressed air. CO5 series cylinders are easy to install in confined spaces, easy to clean, and offer good corrosion resistance. The cylinders are supplied pre-lubricated (for applications where additional lubrication is not required). CO5 cylinders incorporate nitrile (NBR) seals, brass end caps, an anodised aluminium body, with a stainless steel piston rod. Offering high clamping forces, the cylinders are ideally suited for clamping and locking operations, and within operating environments from -20 to 70°C.

Specificaties
Kenmerk Waarde
Stroke 4mm
Bore 20mm
Action Single
Manufacturer Series C05
Dimensions 40 x 20 x 32mm
Length 40mm
Width 20mm
Maximum Operating Pressure 10 bar
Height 32mm
Minimum Operating Temperature -20°C
Maximum Operating Temperature +70°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 09-06-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
53,83
(excl. BTW)
65,13
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 53,83
5 +
€ 52,19
Related Products
High quality compact cylinder offers high performance in ...
Description:
High quality compact cylinder offers high performance in a small package. It is double acting and has a magnetic piston, high abrasion-resistant seals and thick end bumpers. The mounting hole spacing allows use of all standard VDMA cylinder mountings with ...
Magnetic piston as standard across rangeStainless steel piston ...
Description:
Magnetic piston as standard across rangeStainless steel piston rodAnodised aluminium alloy barrel and end capsPolyurethane nitrile rubber sealsVery compact - approximately one third the length of a corresponding ISO modelSpring return on single-acting modelsTemperature range -5°C to +80°C (consult our ...
Magnetic piston as standard across rangeStainless steel piston ...
Description:
Magnetic piston as standard across rangeStainless steel piston rodAnodised aluminium alloy barrel and end capsPolyurethane nitrile rubber sealsVery compact - approximately one third the length of a corresponding ISO modelSpring return on single-acting modelsTemperature range -5°C to +80°C (consult our ...
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.