Festo Cable Lead Connecting Cable

  • RS-stocknr. 136-6511
  • Fabrikantnummer KMEB-1-24-2,5-LED
  • Fabrikant Festo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: BG
Productomschrijving

KMEB Series Valve Cable

The KMEB series from Festo is a pre-assembled cable for VUVB, MEBH, MOEBH valves and N2 solenoids.

Festo KMEB-1-24-2,5-LED Cable Lead

This KMEB-1-24-2,5-LED from Festo is an LED plug socket with a connecting cable lead which comes pre-assembled for valves with EB solenoid coil.It can be mounted on a solenoid valve with M2.5 central screw type and can be assembled in any position offering you complete flexibility.

Features and Benefits

KNEB Series LED illuminated signal status display PVC cable sheath material 24 V DC with LED's and protective circuit Reverse polarity protected 2.5-meter cable length 5.2 mm cable diameter 3-pin angled plug socket PA housing PA66-GF30 Bronze crimp connectors Operating temperature range of -20 to +80 °C IP65 protection to IEC 60529

Specificaties
Kenmerk Waarde
Manufacturer Series KMEB-1
For Use With Valves with EB Solenoid Coil
57 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
19,92
(excl. BTW)
24,10
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 19,92
Related Products
SRBC sensor boxes are used with quarter turn ...
Description:
SRBC sensor boxes are used with quarter turn pneumatic actuators (such as the Festo DFPD series). They provide electrical feedback and a visual indication of the valves current position and are easily installed using mounting adapters. Installation is easy using ...
The LS04 series of small and extra small ...
Description:
The LS04 series of small and extra small valves, being extremely light and fast acting, is ideally suited to applications where close connection on moving parts, such as pick and place systems, is required. Compact sizeHigh flow to size ratioFast ...
Festo NEBU series modular connecting cables offer a ...
Description:
Festo NEBU series modular connecting cables offer a wide variety possible combinations of plug and sockets and cable lengths. Suitable for all devices with M8 and M12 plugs such as proximity sensors, position transmitters, pressure and flow sensors, optical and ...
• Cable diameter 6 mm to 8 mm• ...
Description:
• Cable diameter 6 mm to 8 mm• Terminal cross-section 0.14 mm² to 0.75 mm²• IP67 Protection• Ambient temperature -25°C to +85°C• CE mark to EU directive low voltage devices• RoHS compliant• Corrosion resistance class 1 (low corrosion stress)• Zinc ...