SMC NPN Solid State Pneumatic Switch, D-M9 Series

  • RS-stocknr. 826-2155
  • Fabrikantnummer D-M9BWL
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

D-M9 Series

D-M9 series solid-state magnetic sensor for pneumatic actuators. These pneumatic switch sensors are the output style: 2 wire. The enclosure rating is watertight with a rating of IP67. The D-M9 is available in an optional two colour indicator to eliminate the guess work out of setting a sensor.

Auto Switches

Specificaties
Kenmerk Waarde
Manufacturer Series D-M9
Compatible With Size 05, Size 1, Size 10 to 40 CDRQ2 Series Rotary Actuator, Size 10 to 40 CDRQ2X Series Rotary Actuator, Size 10 to 50 MSQX Series Rotary Actuator, Size 10 to 50 MSZ Series Rotary Actuator, 1 CRJ Series Rotary Actuator, 7, 10 to 200 MSQ Series Rotary Actuator
Type Solid State
Operation NPN
LED Indicator Yes
Voltage Rating 24V dc
Voltage Drop ≤4V
IP Rating IP67
Maximum Operating Temperature +60°C
Minimum Operating Temperature -10°C
21 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
35,98
(excl. BTW)
43,54
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 35,98
5 - 9
€ 34,88
10 +
€ 33,75
Related Products
The SMC D-A9 series 24VDC pneumatic reed position ...
Description:
The SMC D-A9 series 24VDC pneumatic reed position detector is robust equipment with a magnetic sensor for pneumatic actuation. It comes with built-in indicator lights and set screws. The detector lead wire is 3m long and weighs 30g. Durable vinyl ...
The SMC D-M9 series M8, 3-pin solid-state reed ...
Description:
The SMC D-M9 series M8, 3-pin solid-state reed switch has a lead wire length of 3m with pre-wired, 500mm long connector. It is a 3-wire connector with PNP output and an in-line electrical entry. This switch has a red LED ...
The SMC D-M9 series solid-state switch has a ...
Description:
The SMC D-M9 series solid-state switch has a load voltage of 24VDC with a maximum load current of 40mADC. The switch has 2-wire output with a 3000mm lead wire length. It has an internal drop voltage of 4VDC with a ...
Range of static detectors with integral fittingsEasily fitted ...
Description:
Range of static detectors with integral fittingsEasily fitted to the cylinder groove on C55, MY1 series, etc.Reduced load currentExtra-flexible wireFor relays, printed circuits, programmable controllers.