IMI Norgren PNEUFIT Series Elbow Threaded Adaptor, R 1/4 Male to Push In 6 mm, Threaded-to-Tube Connection Style
- RS-stocknr.:
- 210-2388
- Fabrikantnummer:
- 101470628
- Fabrikant:
- IMI Norgren
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 210-2388
- Fabrikantnummer:
- 101470628
- Fabrikant:
- IMI Norgren
Datasheets
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- GB
Productomschrijving
IMI Norgren Threaded-To-Tube Elbow Adaptor, R1/4 Male To Push-In 6mm, Swivel Connection - PNEUFIT Series - 101470628
For straightforward assembly of a pneumatic circuit, choose this elbow adaptor from IMI Norgren. Its swivel function adds flexibility to your set-up as it can rotate in any direction. A non-PTFE (polytetrafluoroethylene) coating on the adaptor's threaded connector end ensures smooth insertion and eliminates the risk of any distortion under pressure. The other end's push-in connector allows for simple, tool-free assembly. Thanks to its wide operating pressure range of -0.9 to 18 bar, this device is suitable for use in both low-pressure and high-pressure systems.
Features & Benefits
• Nickel-plated brass body for durability and resistance corrosion
• Silicone-free O-rings for reduced risk of environmental contamination
• Right-angle orientation to fit into tight or awkward spaces
• Wide operating temperature range of -20°C to +80°C for use in demanding environments
• Silicone-free O-rings for reduced risk of environmental contamination
• Right-angle orientation to fit into tight or awkward spaces
• Wide operating temperature range of -20°C to +80°C for use in demanding environments
Applications
• Conveyor and assembly lines
• Air tools
• Controls and actuators
• Air tools
• Controls and actuators
How do I assemble and disassemble this adaptor?
When connecting this adaptor, you should first ensure that your tubing is burr-free. Then simply push the hose into the fitting until it bottoms on the tube-stop. To disconnect, push the tube into the fitting, hold down the collet and withdraw the hose.
Specificaties
Kenmerk | Waarde |
---|---|
Connector A | R 1/4 Male |
Connector B | Push In 6 mm |
Pneumatic Fitting Type | Elbow Threaded Adaptor |
Connection Style | Threaded-to-Tube |
Threaded Connection | R 1/4 Male |
Manufacturer Series | PNEUFIT |
Thread Material | Nickel Plated Brass |
Swivel Connection | Yes |
Maximum Operating Pressure | 18 bar |
Angle | 90° |
Body Material | Nickel Plated Brass |
Minimum Operating Temperature | -20°C |
Maximum Operating Temperature | +80°C |