SMC Speed Exhaust Controller, 1/4 in R 1/4 Male x6mm

  • RS-stocknr. 700-5813
  • Fabrikantnummer ASV310F-02-06S
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: JP
Productomschrijving

SMC Adjustable Quick Exhaust Valve

Integral exhaust restrictor and silencer
Excellent control characteristics
Push-in inlet and tapered thread outlet connections
Pressure range 1 to 10.2 bar
Typical noise reduction 20dB

Specificaties
Kenmerk Waarde
Manufacturer Series ASV
Connection Type Threaded, Tube
Threaded Connections R 1/4 Male
Tube Connections 6mm
Built-In Silencer Yes
Threaded Connection - Gender Male
Threaded Connection Size 1/4 in
Minimum Operating Pressure 0.1MPa
Threaded Connection Type R
Maximum Operating Pressure 1 MPa
12 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
20,89
(excl. BTW)
25,28
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 20,89
5 - 9
€ 20,25
10 +
€ 19,60
Related Products
Banjo with external screw, push-in connectionReliable and progressive ...
Description:
Banjo with external screw, push-in connectionReliable and progressive adjustmentLock nut guaranteeing stability of adjustmentRobust construction for improved longevityTreated brass body extremely resistant to external aggressions - temperature, sparking, corrosion.
Banjo with external screw and push-in connectionReliable, precise ...
Description:
Banjo with external screw and push-in connectionReliable, precise and progressive adjustmentLock nut to prevent unwanted adjustmentPerfectly adapted to reduced spaces due to their small size.
These components allow higher piston speeds to be ...
Description:
These components allow higher piston speeds to be achieved on the return stroke of single and double-acting cylinders.Compressed air flows from the pilot valve and via the quick exhaust valve to the cylinder. The exhaust port 3 is closed at ...
Simple, low cost unitsSuitable for direct connection to ...
Description:
Simple, low cost unitsSuitable for direct connection to pressure vessels and associated componentsPop-type operation with plunger test pointRelief setting accuracy +/-20%.