SMC 2 Finger Double Action Pneumatic Gripper, MHF2-12D1

  • RS-stocknr. 700-7275
  • Fabrikantnummer MHF2-12D1
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

MHF2 Low Profile Air Gripper

The MHF two finger pneumatic gripper compact design reduces bending moment, improves positional accuracy and saves space. Its double piston gripper construction provides a powerful griping force while remain compact and mounting flexibility is achieved by removing the need for brackets. Auto-switches can be mounted on either side using channels in the body.

Double-acting
Non lubricated

Specificaties
Kenmerk Waarde
Manufacturer Series MHF2
Action Double
Number of Fingers 2
Gripping Type Low Profile, Parallel
Maximum Operating Pressure 0.7 MPa
Port Connection M5
Weight 190g
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 28-09-2020, met een levertijd van 1 werkdag.
Prijs Each
509,17
(excl. BTW)
616,10
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 509,17
Related Products
The Festo radial gripper DHRS-25-A indicated opening and ...
Description:
The Festo radial gripper DHRS-25-A indicated opening and closing times [Ms] were measured at room temperature at an operating pressure of 6 bar with the gripper horizontally mounted and without additional gripper fingers (mean values shown). The grippers must be ...
Double-acting, single rod plate cylinders which use special ...
Description:
Double-acting, single rod plate cylinders which use special piston design to save installation space and can be mounted directly from all faces (except port face). The piston is non-rotating with a built-in magnet for auto-switch sensing. Working pressure range 0.51 ...
Hollow piston rod allows vacuum connectionVacuum pad can ...
Description:
Hollow piston rod allows vacuum connectionVacuum pad can be mounted directly to piston rod using female thread vacuum pads, available separatelyDouble actingNon-rotating piston rod, accuracy ±0.8º (16mm dia), ±0.5º (20mm dia)Proof pressure 10.5 barOperating pressure range 0.7 bar, 16mm dia ...
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication ...
Description:
Bore sizes 6, 10, 16mmMagnetic piston standardCompact designLubrication not requiredMale-threaded rod endIP67 ratedProof pressure 1.05 barOperating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)Ambient and fluid temperature -10ºC to +60°CStroke tolerance +1.0mm, -0mmRubber bumper ...