SMC Pneumatic Guided Cylinder 16mm Bore, 15mm Stroke, CQM Series, Double Acting

  • RS-stocknr. 160-521
  • Fabrikantnummer CDQMB16-15
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: JP
Productomschrijving

SMC CQM Compact Guided/Guide Rod Cylinder

SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series cylinders. The non-rotatable cylinders feature a hard anodized aluminium body, and are available as double-acting units with a magnetic piston as standard. Two mounting bolts are included.

Specificaties
Kenmerk Waarde
Manufacturer Series CQM
Action Double
Bore 16mm
Stroke 15mm
Maximum Operating Pressure 1 MPa
Cushioning Type Rubber
Dimensions 46.5 x 29 x 29mm
Weight 77g
Maximum Operating Temperature +70°C
Length 46.5mm
Minimum Operating Temperature -10°C
Width 29mm
Height 29mm
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
59,74
(excl. BTW)
72,29
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 59,74
Related Products
Magnetic piston as standard across rangeStainless steel piston ...
Description:
Magnetic piston as standard across rangeStainless steel piston rodAnodised aluminium alloy barrel and end capsPolyurethane nitrile rubber sealsVery compact - approximately one third the length of a corresponding ISO modelSpring return on single-acting modelsTemperature range -5°C to +80°C (consult our ...
Festo DFM series pneumatic guided cylinders are double ...
Description:
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications ...
SMC Dual-Rod Cylinders with slide bearings (CXSM type) ...
Description:
SMC Dual-Rod Cylinders with slide bearings (CXSM type) or ball bearing slides (CXSL type), suitable for 'pick-and-place' applications, operating with non-lubricated, filtered, compressed air. Dual-Rod Cylinders feature high non-rotational accuracy, dual port locations, and standard magnetic sensing and buffer ...
The CXS range of Dual-Rod Cylinders come with ...
Description:
The CXS range of Dual-Rod Cylinders come with slide bearings (CXSM type and CXSJM) or ball bearing slides (CXSL and CXSJL type). This range of cylinders is suitable for ’pick-and-place’ applications, operating with non-lubricated, filtered and compressed air. The Dual-Road ...