SMC Pneumatic Guided Cylinder 6mm Bore, 20mm Stroke, CXS Series

  • RS-stocknr. 712-0726
  • Fabrikantnummer CXSM6-20
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

SMC CXS Dual-Rod Cylinder Range

SMC Dual-Rod Cylinders with slide bearings (CXSM type) or ball bearing slides (CXSL type), suitable for 'pick-and-place' applications, operating with non-lubricated, filtered, compressed air. Dual-Rod Cylinders feature high non-rotational accuracy, dual port locations, and standard magnetic sensing and buffer cushioning. Integral stroke adjustment may be set to standard stroke less 5mm. The cylinders incorporate a recess for auto switches, and may be used in operating environments from 5 to 60°C.

Specificaties
Kenmerk Waarde
Manufacturer Series CXS
Bore 6mm
Stroke 20mm
Maximum Operating Pressure 0.7 MPa
Cushioning Type Rubber
Dimensions 78.5 x 16 x 37mm
Weight 95g
Maximum Operating Temperature +60°C
Length 78.5mm
Height 37mm
Minimum Operating Temperature -10°C
Width 16mm
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
157,70
(excl. BTW)
190,82
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 157,70
Related Products
The Festo AEN series compact cylinder has a ...
Description:
The Festo AEN series compact cylinder has a single-acting actuator with position sensing and external piston rod thread to move in any position. It has a pneumatic connection M3 with male thread. Its stoke diameter is 5mm with bore size ...
The CQS Series of Compact Cylinders is available ...
Description:
The CQS Series of Compact Cylinders is available for those small bore cylinder applications. Both switch capable and non-switch capable body styles are the same. Space and weight savingMagnetic or non-magnetic pistons availableProof pressure 15 barInternal thread rod ends Nitrile ...
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...
Festo DFM series pneumatic guided cylinders are double ...
Description:
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications ...