SMC Pneumatic Guided Cylinder 50mm Bore, 125mm Stroke, MGP Series, Double Acting

  • RS-stocknr. 758-0837
  • Fabrikantnummer MGPM50TF-125Z
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

SMC MGP Compact Guide Cylinder with End Lock

SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and a T-slot mount option), with pneumatic ports on the top or side. CQM double-acting cylinders are non-rotatable, offer a high resistance to side loads, and are able to withstand lateral loading forces that are more than twice the force experienced by conventional stopper cylinders. SMC MGP cylinders with End Lock are suitable for conveyor line stopping, lifting, positioning, or push-off applications.

Note

May be used with reed switch 161-782, available in most markets.

Specificaties
Kenmerk Waarde
Manufacturer Series MGP
Action Double
Bore 50mm
Stroke 125mm
Maximum Operating Pressure 1 MPa
Cushioning Type Rubber
Dimensions 243 x 112 x 48mm
Weight 6kg
Maximum Operating Temperature +60°C
Length 243mm
Minimum Operating Temperature -10°C
Width 48mm
Height 112mm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
420,59
(excl. BTW)
508,91
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 420,59
Related Products
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...
Festo DFM series pneumatic guided cylinders are double ...
Description:
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications ...
Compact, double-acting guided cylinders utilising slide bearings. These ...
Description:
Compact, double-acting guided cylinders utilising slide bearings. These cylinders maintain a very high non-rotational accuracy and have a high tolerance to side loading. All cylinders have magnetic sensing capabilities and direct mount facilities. Very high resistance to radial loads.Use with ...
The SMC MGP series of compact guide cylinder ...
Description:
The SMC MGP series of compact guide cylinder is designed for high side load applications found in material handling, lifting and stopping. The MGP series incorporates the cylinder body as part of the guide body to give an ultra-compact design. ...