SMC Pneumatic Guided Cylinder 63mm Bore, 50mm Stroke, MGP Series, Double Acting

  • RS-stocknr. 758-0859
  • Fabrikantnummer MGPM63TF-50Z
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

SMC MGP Compact Guide Cylinder with End Lock

SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and a T-slot mount option), with pneumatic ports on the top or side. CQM double-acting cylinders are non-rotatable, offer a high resistance to side loads, and are able to withstand lateral loading forces that are more than twice the force experienced by conventional stopper cylinders. SMC MGP cylinders with End Lock are suitable for conveyor line stopping, lifting, positioning, or push-off applications.

Note

May be used with reed switch 161-782, available in most markets.

Specificaties
Kenmerk Waarde
Manufacturer Series MGP
Action Double
Bore 63mm
Stroke 50mm
Maximum Operating Pressure 1 MPa
Cushioning Type Rubber
Dimensions 156.5 x 112 x 48mm
Weight 4.9kg
Maximum Operating Temperature +60°C
Length 156.5mm
Width 48mm
Minimum Operating Temperature -10°C
Height 112mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 14-04-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
379,71
(excl. BTW)
459,45
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 379,71
Related Products
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
Festo DFM series pneumatic guided cylinders are double ...
Description:
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications ...
Compact, double-acting guided cylinders utilising slide bearings. These ...
Description:
Compact, double-acting guided cylinders utilising slide bearings. These cylinders maintain a very high non-rotational accuracy and have a high tolerance to side loading. All cylinders have magnetic sensing capabilities and direct mount facilities. Very high resistance to radial loads.Use with ...
SMC CQMB is the refined variant of the ...
Description:
SMC CQMB is the refined variant of the original CQ2 series of compact cylinders. The new CQMB series come equipped with a new body which allows mounting of auto switches onto any 4 of the dies depending on the installation. ...