SMC Pneumatic Guided Cylinder 40mm Bore, 40mm Stroke, CQ2 Series, Double Acting

  • RS-stocknr. 838-8957
  • Fabrikantnummer CQ2B40-40DZ
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

CQ2 Series Compact Cylinders

Compact space saving cylinders
Double acting, Single rod
Wide range of options available
Auto switch capable
Proof pressure: 1.5 MPa
Maximum operating pressure: 1.0 MPa

Specificaties
Kenmerk Waarde
Manufacturer Series CQ2
Action Double
Bore 40mm
Stroke 40mm
Maximum Operating Pressure 1 MPa
Dimensions 79.5 x 57 x 52mm
Weight 337g
Maximum Operating Temperature +70°C
Length 79.5mm
Height 52mm
Minimum Operating Temperature -10°C
Width 57mm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
54,81
(excl. BTW)
66,32
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 54,81
Related Products
RS Pro double-acting compact cylinders according to ISO ...
Description:
RS Pro double-acting compact cylinders according to ISO 21287 suitable forfiltered and lubricated compressed air, as well as non lubricated air.- Pressure Range: 1 bar (0.1 MPa) to 10 bar (1 MPa)- Temperature Range: 0 °C (-20 °C with dry ...
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...
Festo DFM series pneumatic guided cylinders are double ...
Description:
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Four plain slide bearings on the large diameter guide rods provide high rigidity suitable for high loads. Designed for high load pneumatic applications ...