Norgren Plunger 5/2 Pneumatic Manual Control Valve X30 Series

  • RS-stocknr. 722-508
  • Fabrikantnummer X3044002
  • Fabrikant Norgren
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Plunger/Spring Valves

Valves suitable for use with cylinders up to 50mm bore for most applications. Suitable for multi-directional flow and dual supply applications. High flow capacity. Made from lightweight, corrosion-resistant materials.

Note

Due to manufacturer change, valves of 3/2 function now have moulded polymer (Fortron PPS) body which replaces the older metal body

Specificaties
Kenmerk Waarde
Control Mechanism Plunger
Function 5/2
Connection Port Thread G 1/8
Thread Size 1/8in
Thread Standard G
Manufacturer Series X30
Maximum Operating Pressure 10 bar
Body Material Zinc Alloy
Maximum Flow Rate 335L/min
Minimum Operating Temperature 0°C
Maximum Operating Temperature +70°C
Number of Ports 5/2
12 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
62,65
(excl. BTW)
75,81
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 62,65
5 +
€ 60,74
Related Products
A low force microswitch, requiring only a 50g ...
Description:
A low force microswitch, requiring only a 50g activation force at 6bar. Will also accept all microswitch actuatorsBuilt in hose nipple connection suitable for Ø4mm OD, 2.5mm ID tubeInterchangeable with V3 electrical switchesPressure Range: 2 to 8 barTemperature range: -10 ...
3Port/2Way Valves. Port size G 1/8, poppet design ...
Description:
3Port/2Way Valves. Port size G 1/8, poppet design (high flow with compact size). Maximum pressure 10bar, temperature range -20°C to +80°C.
Wide range of operatorsSuitable for Multi directional flow ...
Description:
Wide range of operatorsSuitable for Multi directional flow and dual supply applicationsHigh flow capacityLightweight corrosion resistant materials.
Vent fittings available as either Supply or Control ...
Description:
Vent fittings available as either Supply or Control types.,Control type operates in the opposite direction to the supply type, i.e. air supply is fed in through threaded port 1 and out to system through push-in port 2. Port 3 location ...