SMC Push Button 3/2 Pneumatic Manual Control Valve VR51 Series

  • RS-stocknr. 686-2719
  • Fabrikantnummer VR51-C06B
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Two-Hand Control Unit and Separate Control Valve

Two-Hand Control Unit

The polymer enclosure two-hand control unit (stock no. 410-501) incorporates protective guards, two 40mm diameter pushbuttons and a control module. The ergonomically-designed unit enables safe operation of machinery and guards against accidental operation. The two-hand control unti conforms to EN574 and EN954-1 requirements.

Two-Hand Control Valve

The VR51 Two-Hand Control Valve (stock no. 686-2719) may be installed in pneumatic control systems in much the same way as the Two-Hand Control Unit to prevent unsafe operation of machinery while one or both hands may be free to encroach into unsafe machine working areas. The VR51 can be installed, set up and configured as part of a safety circuit, for example, between two pushbutton-operated valves, an air-operated valve and a pneumatic cylinder, within a pneumatic control system.

Standards

EN 574 and EN 954-1

Specificaties
Kenmerk Waarde
Control Mechanism Push Button
Function 3/2
Manufacturer Series VR51
Maximum Operating Pressure 1 MPa
Body Material Die Cast Aluminium
Maximum Flow Rate 1L/s
Minimum Operating Temperature -5°C
Maximum Operating Temperature +60°C
Number of Ports 3/2
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
278,44
(excl. BTW)
336,91
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 278,44
5 +
€ 269,94
Related Products
3 and 5 port valves for for multi-directional ...
Description:
3 and 5 port valves for for multi-directional flow and dual supply applications. Suitable for use with cylinders up to 50mm bore. High flow capacity with a wide range of operators.,Manufactured with lightweight corrosion resistant materials.
3 port / 2 way normally closed valves. ...
Description:
3 port / 2 way normally closed valves. CV 0.055Each valve incorporates built in hose nipple connection suitable for Ø4mm OD, 2.5mm ID tubeSeparate valves must be used for nylon or polyurethane tubingInterchangeable with V3 microswitches.
The SMC VH series are compact rotary hand ...
Description:
The SMC VH series are compact rotary hand valves with a variety of flow rates. Suitable for applications that require manual directional control. These valves are easy to operate while offering a high tolerance to contamination. Body mounted or panel ...
Professional SMC mechanical valves from the VM series. ...
Description:
Professional SMC mechanical valves from the VM series. Their compact size requires little mounting space, the VM series offers a wide variety of actuator styles and flow capacity to to 1.0 Cv. 2 or 3 PortsFluid - Air/Inert Gas-100 to ...