3 Outlet Ports PBT Pneumatic Manifold Tube-to-Tube Fitting

  • RS-stocknr. 181-6148
  • Fabrikantnummer QSLV3-1/4-8
  • Fabrikant Festo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

FESTO QSLV Tube to Tube Fitting

The Festo QSLV multiple distributor has 2 outlet ports and the housing is made of PBT material. The stainless steel retaining claw within the fitting holds the tubing securely without damaging its surface. The vibration and pressure surges are safely absorbed.

Features and Benefits

  • The distributor has a blue release ring to allow for the tubing to be detached easily

  • The respective outside tubing diameter is marked on the release ring for convenience and ease of use

  • Any brass used within the push-in fittings are nickel-plated, making them resistant to corrosion and damage

  • 360° assembly position, meaning the fitting can be easily aligned after assembly

Applications

The FESTO range of multiple distributors can be used in a number of industrial applications such as

  • Aerospace

  • Air compressors

  • Gas stations

  • Mining industry

Multiple Distributor QSLV3-1/4-8

  • Ambient temperature ranges between -10°C and 80°C

  • Easy to insert and release

  • 4.2mm nominal size

  • Non-corrosive material

  • Outlet ports: male thread R1/4 and 8mm tubing outside diameter

  • Outlet pressure ranges between -0.95bar and 6bar

  • Materials used conform to RoHS

Tube to Tube Adapters

Specificaties
Kenmerk Waarde
Connection Style Threaded-to-Tube
Number of Outlet Ports 3
Outlet Port Push In 8 mm
Inlet Port R 1/4
Number of Inlet Ports 1
Mounting Type Inline
Manufacturer Series QSLV
Material PBT
Maximum Operating Pressure 6 bar
Maximum Operating Temperature +80°C
Minimum Operating Temperature -10°C
Suitable Media Air
6 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
15,66
(excl. BTW)
18,95
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 15,66
5 - 9
€ 15,03
10 +
€ 14,41
Related Products
Enhanced performance demountable DZR brass fittingsFeatures a stainless ...
Description:
Enhanced performance demountable DZR brass fittingsFeatures a stainless steel grab ringSuitable for use with copper or plastic tubeFor use in the mechanical services sector on hot and cold water applicationsProvides electrical continuity.
SITRANS 5100W flow sensors from Siemens have been ...
Description:
SITRANS 5100W flow sensors from Siemens have been designed to fulfil the requirements of the water industry. Used in conjunction with the MAG 5000 or 6000 transmitters, they can be used with waste water, ground water, drinking water, filtration, irrigation, ...
Shuttle (OR gate) version can be used to ...
Description:
Shuttle (OR gate) version can be used to connect independent signal sources to a common pilot lineAND gate function gives output signal only when both input signals are presentColour coded port identification.
The function fittings of RS Pro have been ...
Description:
The function fittings of RS Pro have been designed to suit a specific use. With a large variety of materials (brass, stainless steel, technopolymer, aluminium) they respond to the most extreme demand of pneumatic: flow controls, pressure regulators, unidirectional valves, ...