SMC Double Action Pneumatic Pin Cylinder, CDJP2B16-25D

  • RS-stocknr. 547-530
  • Fabrikantnummer CDJP2B16-25D
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
Niet conform
Land van herkomst: JP
Productomschrijving

Cylinders

Bore sizes 6, 10, 16mm
Magnetic piston standard
Compact design
Lubrication not required
Male-threaded rod end
IP67 rated
Proof pressure 1.05 bar
Operating pressure 1.2 bar, 6mm dia and 0.6 bar, 10mm/16mm dia (min) 7 bar (max)
Ambient and fluid temperature -10ºC to +60°C
Stroke tolerance +1.0mm, -0mm
Rubber bumper cushion at both ends

Specificaties
Kenmerk Waarde
Manufacturer Series CJP2
Action Double
Rods Single
Bore 16mm
Stroke 25mm
Piston Speed 50 → 500mm/s
Maximum Operating Pressure 0.7 MPa
Cushioning Type Rubber
Port Connection M5 x 0.8
Dimensions 68.5 x 20 x 24.5mm
Weight 58g
Minimum Piston Speed 50mm/s
Height 24.5mm
Length 68.5mm
Width 20mm
Maximum Operating Temperature +70°C
Minimum Operating Temperature -10°C
Maximum Piston Speed 500mm/s
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
39,93
(excl. BTW)
48,32
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 39,93
5 - 9
€ 38,71
10 +
€ 37,45
Related Products
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...
Festo DFM series pneumatic guided cylinders are double ...
Description:
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Recirculating ball bearings drive the guide rods making it ideal for applications where torque loads are present. Designed for high load pneumatic applications ...
The solution for a linear-actuator subject to high ...
Description:
The solution for a linear-actuator subject to high loads. Ideal for material handling applications. Two types of guide rod bearing for different applications. The overall package is very compact and pre-tapped mounting holes ensure easy attachment of fixtures. Compact guide ...