SMC Single Action Pneumatic Pin Cylinder, CJ1B2-5SU4

  • RS-stocknr. 264-6103
  • Fabrikantnummer CJ1B2-5SU4
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: JP
Productomschrijving

Pneumatic Needle Cylinders

Designed to automate delicate operations
Plug directly into 4mm OD x 2.5mm ID tubing, available separately
Single acting - spring retracting
Non-lubricated

Test pressure10.5 Bar
Operating pressure 3 bar (min) to 7 bar (max)
Ambient and fluid temperature -10°C to +70°C
Piston speed 50-500mm/sec
Non-cushioned
Stroke tolerance +0.5mm -0mm

Note

Outward Thrust and Return Thrust or Pull are calculated at maximum operating pressure (7 bar)

//media.rs-online.com/t_line/L264611-01.gif
//media.rs-online.com/t_line/LE264611-01.gif
//media.rs-online.com/t_line/LI264611-01.gif
Specificaties
Kenmerk Waarde
Manufacturer Series CJ1
Action Single
Rods Single
Bore 2.5mm
Stroke 5mm
Piston Speed 50 → 500mm/s
Maximum Operating Pressure 0.7 MPa
Cushioning Type Not Cushioned
Port Connection U4
Dimensions 3.5 (Dia.) x 29mm
Weight 12g
Minimum Piston Speed 50mm/s
Length 29mm
Maximum Piston Speed 500mm/s
Diameter 3.5mm
Maximum Operating Temperature +70°C
Minimum Operating Temperature -10°C
4 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
31 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
17,69
(excl. BTW)
21,40
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 17,69
5 - 9
€ 17,15
10 +
€ 16,60
Related Products
The CQS Series of Compact Cylinders is available ...
Description:
The CQS Series of Compact Cylinders is available for those small bore cylinder applications. Both switch capable and non-switch capable body styles are the same. Space and weight savingMagnetic or non-magnetic pistons availableProof pressure 15 barInternal thread rod ends Nitrile ...
SMC SV Series employ multi-pin connectors in place ...
Description:
SMC SV Series employ multi-pin connectors in place of conventional lead wires within manifold blocks. The design of the connector-type manifold enables any changes within the manifold station to be greatly simplified. Cassette base type manifolds offer the ultimate in ...
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...
SMC Dual-Rod Cylinders with slide bearings (CXSM type) ...
Description:
SMC Dual-Rod Cylinders with slide bearings (CXSM type) or ball bearing slides (CXSL type), suitable for 'pick-and-place' applications, operating with non-lubricated, filtered, compressed air. Dual-Rod Cylinders feature high non-rotational accuracy, dual port locations, and standard magnetic sensing and buffer ...