SMC Double Action Pneumatic Pin Cylinder, CDJ2B16-75Z-B

  • RS-stocknr. 890-3269
  • Fabrikantnummer CDJ2B16-75Z-B
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CH
Productomschrijving

CJ2 Series Cylinders

The CJ2 series from SMC are miniature cylinders. Available in spring extend, spring return, or double acting offer stainless steel tubing and stainless steel rods.These pneumatic cylinders are available in various bore sizes and stroke lengths. Mounting options include basic, foot, front flange, and double rear clevis. Series CJ2 is auto switch capable.

Compact / lightweight mini air cylinders
Double acting, high speed
Built in magnet

Note

Outward Thrust and Return Thrust or Pull are calculated at maximum operating pressure (7bar).

Specificaties
Kenmerk Waarde
Action Double
Rods Single
Bore 16mm
Stroke 75mm
Piston Speed 50 → 750mm/s
Maximum Operating Pressure 0.7 MPa
Absolute Maximum Pressure 1.05MPa
Cushioning Type Rubber
Port Connection M5 x 0.8
Dimensions 150 x 18 x 18mm
Weight 55g
Minimum Piston Speed 50mm/s
Minimum Operating Temperature -10°C
Maximum Piston Speed 750mm/s
Length 150mm
Maximum Operating Temperature 60°C
Width 18mm
Height 18mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 18-08-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
50,15
(excl. BTW)
60,68
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 50,15
5 - 9
€ 48,63
10 +
€ 47,06
Related Products
ISO Standard compact cylinder with hard anodized aluminium ...
Description:
ISO Standard compact cylinder with hard anodized aluminium body. Available as double acting with magnetic piston as standard. ISO standard 21287CompactMagnetic sensing.
Magnetic piston as standard across rangeStainless steel piston ...
Description:
Magnetic piston as standard across rangeStainless steel piston rodAnodised aluminium alloy barrel and end capsPolyurethane nitrile rubber sealsVery compact - approximately one third the length of a corresponding ISO modelSpring return on single-acting modelsTemperature range -5°C to +80°C (consult our ...
SMC CQM Compact Guided/Guide Rod cylinders can accommodate ...
Description:
SMC CQM Compact Guided/Guide Rod cylinders can accommodate direct loads, offer a lateral load resistance that is two to four times greater than SMC series CQ cylinders, and include mounting points that are compatible with SMC CQS and CQ2 series ...
SMC MGP Compact Guide slide-bearing cylinders with End ...
Description:
SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and a T-slot mount option), with pneumatic ports on ...