Festo GRLA Pressure Relief Valve G 1/8 0.2bar, to 10 bar

  • RS-stocknr. 202-3002
  • Fabrikantnummer GRLA-1/8-QS-3-D
  • Fabrikant Festo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

The Festo push-in sleeve has push/pull principle of structure which used PBT type of housing material. Its nominal size is 4.9mm and can be assembled in any position. Its operating pressure complete temperature range up to -0.95 - 6 bar.

Container size 10

Specificaties
Kenmerk Waarde
Manufacturer Series GRLA
Seal Material Nitrile Rubber
Inlet Port Thread Standard G
Minimum Operating Pressure 0.2bar
Maximum Operating Pressure 10 bar
Inlet Port Size 1/8
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 10-11-2020, met een levertijd van 1 werkdag.
Prijs Each
13,88
(excl. BTW)
16,79
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 13,88
Related Products
The Festo service unit combination of D series ...
Description:
The Festo service unit combination of D series has filter-regulator-lubricator combination with metal bowl guard. It has fully automatic condensate drain used rotary knob for actuator lock. Its standard nominal flow rate is 2,600 l/min. Ambient temperature -10 to 60 ...
The Festo service unit D series consisting of ...
Description:
The Festo service unit D series consisting of manual on/off valve and filter regulator with mounting bracket. It has standard nominal flow rate is 1,150 l/min and condensate drain fully automatic. Ambient temperature -10 to 60 °CMaximum condensate volume 22cm3. ...
The Festo service unit consisting of filter regulator, ...
Description:
The Festo service unit consisting of filter regulator, distributor module and lubricator which has metal bowl guard with pressure gauge. It has manual condensate drain with standard nominal flow rate 980 l/min. Ambient temperature -10 to 60 °CMaximum condensate volume ...
The Festo service unit combination consisting of filter ...
Description:
The Festo service unit combination consisting of filter regulator, distributor module and lubricator of DB series has 7 bar is the maximum outlet pressure with pressure gauge. It has semi-automatic condensate drain and used rotary knob for actuator lock. Ambient ...