Festo Pressure Sensor, 35V dc, IP65, IP67 +1 bar

  • RS-stocknr. 175-2218
  • Fabrikantnummer SPAW-B2R-G14F-2P-M12
  • Fabrikant Festo
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Festo Pressure Sensor

The Festo SPAW series pressure sensor is designed to measure media pressures with piezoresistive stainless steel measuring cell. It works on 35V supply voltage. The sensor measures the pressure in range of -1bar to 1bar. It has a switchable element function with normally open or normally closed contact. The sensor has a G1/4 top pneumatic connection with an internal thread. It has a 4 digit, 320° rotatable LED display.

Features and Benefits

• Service temperature ranges between 0°C and 80°C
• Switching electrical output is of 2 PNP type
• Numerical percentage pressure indicator
• M12, A coded plug connector electrical connection
• Accuracy is ±1% FS
• Protection against tampering using security code

Applications

• High pressure pneumatic systems
• Pressure monitoring of liquid media

Certifications

• cULus approved
• CE certified
• IP67 rated
• IP65 rated

Specificaties
Kenmerk Waarde
Suitable Media Air, Gas, Liquid
Supply Voltage 35V dc
IP Rating IP65, IP67
Port Connection G 1/4
Minimum Operating Pressure -1bar
Maximum Operating Pressure +1 bar
Minimum Operating Temperature 0°C
Maximum Operating Temperature +80°C
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 03-12-2019, met een levertijd van 1 werkdag.
Prijs Each
234,50
(excl. BTW)
283,74
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 234,50
Related Products
The pressure sensor SDE5 is a cost- effective ...
Description:
The pressure sensor SDE5 is a cost- effective alternative for simple and quick pressure monitoring. The “intelligent fitting” delivers instant information about the current pressure and is an equally effective device for object detection via back pressure as it is ...
The Festo SPAU series pressure sensor is designed ...
Description:
The Festo SPAU series pressure sensor is designed to monitor pressure of compressed air and non-corrosive gases. It works on 30V supply voltage. The sensor measures the pressure in range of -1bar to 0bar. It has a switchable element function ...
The Festo SPAN series pressure sensor is designed ...
Description:
The Festo SPAN series pressure sensor is designed to monitor pressure of compressed air and non-corrosive gases. It works on 30V supply voltage. The sensor measures the pressure in range of -1bar to 1bar. It has a switchable element function ...
The Festo SDE3 series pressure sensor is designed ...
Description:
The Festo SDE3 series pressure sensor is designed to monitor pressure of compressed air. It works on 30V supply voltage. The sensor measures the pressure in range of 0bar to 10bar. It has a switchable element function with normally open ...