Festo Pneumatic Cylinder 80mm Bore, 160mm Stroke, DSBC Series, Double Acting

  • RS-stocknr. 121-5213
  • Fabrikantnummer DSBC-80-160-PPVA-N3
  • Fabrikant Festo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

DSBC Series Profile Cylinders - Adjustable Pneumatic Cushioning

Festo DSBC series pneumatic cylinders with adjustable pneumatic cushioning at both ends of the actuator barrel. Featuring a high-alloy steel piston rod provides excellent running performance, low overall weight and long service life. These double acting pneumatic actuators have dual connection ports for compressed air to be applied for advancing and retracting the piston rod in a linear motion. Magnetic piston rods allow contactless position detection via a proximity sensor mounted in slots along the cylinder body.

Adjustable Pneumatic Cushioning

The DSBC PPV type adjustable cushioning pneumatic cylinders are equipped with a special cushioning piston as an extension to the main piston. This pneumatic cushioning builds up an air cushion to absorb energy in the end positions, building up and exhausting air in a targeted fashion.. This energy absorbing method makes these cylinders ideal for medium to heavy loads and high speed applications.

Features and Benefits

Corresponds to ISO 15552 standard
Slots for flush mounting proximity sensors
Low friction design allowing for continuous operation
Adjustable end cushioning helping to reduce noise and vibration
High-alloy steel piston rod with threaded connector
Wide range of stroke length and bore size variants that can be configured to suit a broad range of applications
Double acting operation

How do I mount the pneumatic actuator?

The DSBC series pneumatic round actuators conform to ISO 15552 standards allowing them to be mounted in any position to suit the required application. The ISO 15552 standard establishes metric mounting dimensions for cylinders providing interchangeability of commonly used hydraulic and pneumatic cylinders. Optional mounting accessories provide further flexibility allowing the cylinder to be attached with a swivel bracket for free movement, foot mounted for support under high loads or combined with other actuators to give a wider range of movement.

Festo ISO 15552 Proflie Cylinders

Specificaties
Kenmerk Waarde
Manufacturer Series DSBC
Action Double
Bore 80mm
Stroke 160mm
Pneumatic Connection G 3/8
VDMA Standard 24562
ISO Standard 15552
Piston Rod Thread Gender Male
Maximum Operating Pressure 12 bar
Cushioning Type Air
Dimensions 377.6 x 93 x 93mm
Weight 2.7kg
Minimum Operating Temperature -20°C
Test Weight 2660 g @ 0 mm Stroke
Width 93mm
Maximum Operating Temperature +80°C
Height 93mm
Stroke Interval Weight 92 g @ 10 mm Stroke
Length 377.6mm
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
229,30
(excl. BTW)
277,45
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 229,30
Related Products
ISO Standard compact cylinder with hard anodized aluminium ...
Description:
ISO Standard compact cylinder with hard anodized aluminium body. Available as double acting with magnetic piston as standard. ISO standard 21287CompactMagnetic sensing.
SMC MGP Compact Guide slide-bearing cylinders with End ...
Description:
SMC MGP Compact Guide slide-bearing cylinders with End Lock (that holds the cylinder in position, even if the air supply is disconnected), offer mounting points on the top, side, or bottom (and a T-slot mount option), with pneumatic ports on ...
RS Pro double-acting pneumatic cylinders according to ISO ...
Description:
RS Pro double-acting pneumatic cylinders according to ISO 15552 suitable forfiltered and lubricated compressed air, as well as non lubricated air.- Pressure Range: 1 bar (0.1 MPa) to 10 bar (1 MPa)- Temperature Range: 0 °C (-20 °C with dry ...
Conforms to Standards: VDMA 24562; (1992); ISO 6431Double-acting ...
Description:
Conforms to Standards: VDMA 24562; (1992); ISO 6431Double-acting and through-rod versionsMagnetic piston as standardClean line cylinderStainless steel piston rodIntegral reed switch slotSeal kits available (a set of O-rings to enable reconditioning of RS VDMA cylinders)Complete with piston rod nut.