Norgren Pneumatic Regulator G 1/2, 0.3 → 17bar

  • RS-stocknr. 184-4435
  • Fabrikantnummer R64G-NNK-RMN
  • Fabrikant Norgren
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Plug-in Regulator

High flow general purpose regulator
Zinc alloy body and yoke
Aluminium bonnet
Mount in any orientation
Yoke required to fit
Repair kit, all serviceable parts

Caution

Before commencing any maintenance, shut off the air supply and exhaust the downstream pressure. This can be done with an exhaust type ball valve.

//media.rs-online.com/t_line/L722621-01.gif
//media.rs-online.com/t_line/LF184443-99.gif

Filter Regulators & Regulators

Olympian® is a registered name of Norgren

All Olympian® Plus units must be mounted in yokes which can be ordered separately, or used with existing 1/2 in Olympian yokes. Gauges must be ordered separately.
Olympian® Plus pressure relief valves and flowmeters have retained the Olympian® screw fitting and are fully compatible with Olympian® and Olympian® Plus.

Maximum flow with 10 bar inlet pressure, 6.3 bar outlet pressure and pressure drop of 1 bar = 130dm³/s
Push-to-lock adjusting knob
Quarter-turn graphite impregnated clamp rings

Specificaties
Kenmerk Waarde
Port Connection G 1/2
Minimum Outlet Pressure 0.3bar
Maximum Outlet Pressure 10bar
Maximum Input Pressure 17bar
Manufacturer Series R64G
Integral Check Valve Without Check Valve
Minimum Operating Temperature -20°C
Maximum Operating Temperature +80°C
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
66,38
(excl. BTW)
80,32
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 66,38
5 - 9
€ 64,35
10 +
€ 62,26
Related Products
National Association of Corrosion Engineer (NACE) standard MR-01-75 ...
Description:
National Association of Corrosion Engineer (NACE) standard MR-01-75 (1980)Withstands harsh, corrosive environmentsIdeal for off-shore applications, food, chemical and petroleum process plantsMaximum operating temperature +65°CGlass filled thermoplastic spring cageUnits can be joined together using barrel nipple ...
Compact, lightweight designTemperature range: 0° to +50°CTypical flow: ...
Description:
Compact, lightweight designTemperature range: 0° to +50°CTypical flow: 130l/minFast response: 42HzHigh precision and reliabilityLow power consumptionIntegrated closed loop pressure measurementRequires dry air filtered to 5μm; 1.5 to 10 barWeight: 180g.
Manifold for up to six regulators without booster ...
Description:
Manifold for up to six regulators without booster signalBalanced valve design for optimum pressure controlPush-to-lock adjusting knobTemperature range -34°C to +65°C/80°C (72//74)Zinc body, brass valve, acetal bonnet and bottom plug.
Compact high precision air regulators with G1/4 ports ...
Description:
Compact high precision air regulators with G1/4 ports suitable for air gauging, laboratory use and precise pilot control. Integral pilot and pressure relief valvesAir requirements; compressed airAir is double filtered before reaching pilot valveRegulation accuracy ref 1 bar input change; ...