SMC Double Acting Acting Rodless Actuator 10mm Bore 100 mm
- RS-stocknr.:
- 885-2234
- Fabrikantnummer:
- CY1SG10-100Z
- Fabrikant:
- SMC
Subtotaal (1 eenheid)*
€ 388,63
(excl. BTW)
€ 470,24
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 16 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 388,63 |
*prijsindicatie
- RS-stocknr.:
- 885-2234
- Fabrikantnummer:
- CY1SG10-100Z
- Fabrikant:
- SMC
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SMC | |
| Product Type | Rodless Actuator | |
| Bore Diameter | 10mm | |
| Connection Thread Standard | Metric | |
| Stroke Length | 100mm | |
| Series | CY1S | |
| Action Type | Double Acting | |
| Maximum Operating Pressure | 0.7 Mpa | |
| Cushioning Type | Rubber | |
| Minimum Operating Temperature | -10°C | |
| Guide Type | Slide Bearing | |
| Port Gender | Female | |
| Maximum Operating Temperature | 60°C | |
| Height | 34mm | |
| Standards/Approvals | No | |
| Length | 176mm | |
| Width | 60mm | |
| Weight | 430g | |
| Port Thread Size | M5 x 0.8 | |
| Alles selecteren | ||
|---|---|---|
Merk SMC | ||
Product Type Rodless Actuator | ||
Bore Diameter 10mm | ||
Connection Thread Standard Metric | ||
Stroke Length 100mm | ||
Series CY1S | ||
Action Type Double Acting | ||
Maximum Operating Pressure 0.7 Mpa | ||
Cushioning Type Rubber | ||
Minimum Operating Temperature -10°C | ||
Guide Type Slide Bearing | ||
Port Gender Female | ||
Maximum Operating Temperature 60°C | ||
Height 34mm | ||
Standards/Approvals No | ||
Length 176mm | ||
Width 60mm | ||
Weight 430g | ||
Port Thread Size M5 x 0.8 | ||
- Land van herkomst:
- GB
SMC CDY1S 10-15mm Diameter Cylinder
Cylinder coupled to piston by magnetic force - no seals needed therefore leakage is eliminated
High load capacity
Autoswitch available
Note
If magnet retaining force is exceeded by the load, the carriage may uncouple from the internal magnets. In this situation, the carriage should be pushed to the stroke end by hand (or the piston moved via air pressure) to re-couple the carriage and piston.
Gerelateerde Links
- SMC Double Acting Acting Rodless Actuator 25mm Bore 100 mm
- SMC Double Acting Acting Pneumatic Guided Cylinder 10mm Bore 200 mm
- SMC Double Acting Acting Pneumatic Guided Cylinder 10mm Bore 50 mm
- SMC Double Acting Acting Pneumatic Guided Cylinder 10mm Bore 100 mm
- SMC Double Acting Acting Rodless Pneumatic Cylinder 10mm Bore 500 mm
- SMC Double Acting Acting Rodless Pneumatic Cylinder 10mm Bore 100 mm
- SMC Double Acting Acting Rodless Pneumatic Cylinder 10mm Bore 150 mm
- SMC Double Acting Acting Rodless Pneumatic Cylinder 10mm Bore 300 mm