SMC Pneumatic Roundline Cylinder 20mm Bore, 25mm Stroke, C85 Series, Single Acting

  • RS-stocknr. 435-8858
  • Fabrikantnummer C85N20-25S
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: JP
Productomschrijving

SMC C85 Pneumatic Cylinders

SMC C85 cylinders conform to ISO 6432 and CETOP RP52P standards, offer 100% mounting repeatability accuracy, incorporate abrasion-resistant seals, and a replaceable piston rod seal. The cylinders are corrosion-resistant, with the barrel and piston rod manufactured from stainless steel, double-swaged anodised aluminium end caps, and offer an exceptional service life. The double-swaged end caps provide an air tight seal. The cylinders offer high dust resistance through the use of a specially-designed and unique dust seal, making SMC C85 pneumatic cylinders suitable for use in extremely dusty environments. A low friction design that incorporates elastomer cushion seals allows the the cylinders to operate at speeds up to 1500 mm/s. C85 cylinders are suppied with a piston rod locknut and nose-mounting nut; installation is made easy through the use of large spanner flats and the space-saving design.

//media.rs-online.com/t_line/L263881-01.gif
//media.rs-online.com/t_line/L263882-01.gif
//media.rs-online.com/t_line/L263883-01.gif
Specificaties
Kenmerk Waarde
Manufacturer Series C85
Action Single
Bore 20mm
Stroke 25mm
Maximum Operating Pressure 1 MPa
Cushioning Type Rubber
Dimensions 28 (Dia.) x 151mm
Maximum Operating Temperature +80°C
Length 151mm
Minimum Operating Temperature -20°C
Diameter 28mm
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
40,58
(excl. BTW)
49,10
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 40,58
5 - 9
€ 39,34
10 +
€ 38,07
Related Products
Magnetic piston as standard across rangeStainless steel piston ...
Description:
Magnetic piston as standard across rangeStainless steel piston rodAnodised aluminium alloy barrel and end capsPolyurethane nitrile rubber sealsVery compact - approximately one third the length of a corresponding ISO modelSpring return on single-acting modelsTemperature range -5°C to +80°C (consult our ...
Compact single and double acting cylinders, considerably shorter ...
Description:
Compact single and double acting cylinders, considerably shorter than corresponding tie rod designs. Space and weight savingMagnetic pistonProof pressure 15barOperating pressure range 0.05MPa (0.51kgf/cm2) min to 10bar maxSupplied with tapered and parallel ports.
Festo DFM series pneumatic guided cylinders are double ...
Description:
Festo DFM series pneumatic guided cylinders are double acting drive and guide unit in a single housing. Recirculating ball bearings drive the guide rods making it ideal for applications where torque loads are present. Designed for high load pneumatic applications ...
The SMC Pneumatic CJP series single acting, spring ...
Description:
The SMC Pneumatic CJP series single acting, spring return pin cylinder is a short stroke miniature cylinder with a shorter overall length. The installation space can be significantly reduced as the cylinder can be recessed directly into a machine body ...