SMC Pneumatic Roundline Cylinder 10mm Bore, 15mm Stroke, CJ2 Series, Single Acting

  • RS-stocknr. 838-9500
  • Fabrikantnummer CJ2B10-15T
  • Fabrikant SMC
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: JP
Productomschrijving

CJ2 Series Cylinders

The CJ2 series from SMC are miniature cylinders. Available in spring extend, spring return, or double acting offer stainless steel tubing and stainless steel rods.These pneumatic cylinders are available in various bore sizes and stroke lengths. Mounting options include basic, foot, front flange, and double rear clevis. Series CJ2 is auto switch capable.

Compact / lightweight mini air cylinders
Double acting, high speed
Built in magnet

Note

Outward Thrust and Return Thrust or Pull are calculated at maximum operating pressure (7bar).

Specificaties
Kenmerk Waarde
Manufacturer Series CJ2
Action Single
Bore 10mm
Stroke 15mm
Maximum Operating Pressure 0.7 MPa
Cushioning Type Rubber
Dimensions 89 x 12 x 12mm
Weight 366g
Height 12mm
Maximum Operating Temperature +70°C
Length 89mm
Minimum Operating Temperature -10°C
13 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
23,02
(excl. BTW)
27,85
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 23,02
5 - 9
€ 22,31
10 +
€ 21,61
Related Products
Miniature pin cylinders for panel mount. All cylinders ...
Description:
Miniature pin cylinders for panel mount. All cylinders are single acting with spring return. Lubrication not requiredThreaded rod-end styleNon-cushionedProof pressure 10.5 barOperating pressure 2 bar, 6mm dia and 1.5 bar, 10mm/15mm dia (min) 7 bar (max)Ambient and fluid temperature 5°C ...
The RS range of ISO 6432 cylinders give ...
Description:
The RS range of ISO 6432 cylinders give high performance and long life even when used with non-lubricated air. Available in both single acting and double acting versions, with magnetic stainless steel pistons on all models Ø12mm and above. AISI ...
SMC C85 cylinders conform to ISO 6432 and ...
Description:
SMC C85 cylinders conform to ISO 6432 and CETOP RP52P standards, offer 100% mounting repeatability accuracy, incorporate abrasion-resistant seals, and a replaceable piston rod seal. The cylinders are corrosion-resistant, with the barrel and piston rod manufactured from stainless steel, double-swaged ...
Mini cylinder conforming to ISO6432Low weight, corrosion resistant ...
Description:
Mini cylinder conforming to ISO6432Low weight, corrosion resistant constructionMagnetic piston as standardSingle and double acting versionsSpring return on single acting modelsEnd of stroke buffer cushioning for longer lifeMedium : Compressed air, filtered, lubricated or non-lubricatedOperating pressure : 10 bar ...