Norgren PNEUFIT Series Straight Threaded Adaptor, R 1/8 Male to Push In 5 mm, Threaded-to-Tube Connection Style
- RS-stocknr.:
- 210-2237
- Fabrikantnummer:
- 101250518
- Fabrikant:
- Norgren
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 210-2237
- Fabrikantnummer:
- 101250518
- Fabrikant:
- Norgren
Datasheets
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
IMI Norgren Pneumatic Fitting, Nickel-Plated Brass, 18 Bar Maximum Pressure - PNEUFIT Series - 101250518
Use this straight pneumatic fitting from IMI Norgren to make airtight connections to pneumatic circuits or compressed air systems. An NBR O-ring provides a tight fit, giving you a robust seal that tolerates pressures between -0.9 and 18 bar. The simple 5mm push-in fitting on one end makes it easy for you to connect tubes to your network rapidly and without the need for specialist tools. On the other end, the standard R1/8 male BSP thread is coated with a sealant to help prevent leaks.
Features & Benefits
Nickel-plated brass body withstands corrosion and environmental stresses
Internal hexagon for tightening with an Allen key allows assembly in confined spaces
Operating temperature range of -20°C to +80°C for use in demanding settings
Internal hexagon for tightening with an Allen key allows assembly in confined spaces
Operating temperature range of -20°C to +80°C for use in demanding settings
Applications
Air brakes
Dental drills
Compressors
Medical devices
Dental drills
Compressors
Medical devices
What does a retained collet do?
A retained collet is a type of holding mechanism that sits inside this pneumatic fitting. It helps grip firmly onto tubing when you insert it into the push-in connector. This minimises the risk of accidental disconnection and ensures you get a stable pneumatic network.
Threaded, Tube-to-Tube & Adaptors
Specificaties
Kenmerk | Waarde |
---|---|
Connector A | R 1/8 Male |
Connector B | Push In 5 mm |
Pneumatic Fitting Type | Straight Threaded Adaptor |
Connection Style | Threaded-to-Tube |
Threaded Connection | R 1/8 Male |
Manufacturer Series | PNEUFIT |
Thread Material | Nickel Plated Brass |
Mounting Type | Inline |
Maximum Operating Pressure | 18 bar |
Body Material | Nickel Plated Brass |
Minimum Operating Temperature | -20°C |
Maximum Operating Temperature | +80°C |
Finish | Nickel Plated |