Polyester resin PE7501P250G

  • RS-stocknr. 182-6360
  • Fabrikantnummer ERPE7501RP250G
  • Fabrikant Electrolube
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

This two-part clear amber Polyester resin uses an innovative blend of technologies to provide the same performance as polyurethane resins whilst removing the hazardous isocyanates used to cure them. It is a soft, flexible resin which can easily be dug-out in order to remove the cured compound from encapsulated units in order to perform repair work or replace components. Whilst this resin can be easily dug out if required, it will maintain an excellent level of hardness stability over a wide operating temperature range meaning that this does not limit its use. The resin exhibits a low sensitivity to moisture, both during and after cure and maintains an excellent electrical properties. This potting or encapsulation compound is a good choice for units which may need to be reworked or repaired at some stage in their working life, while maintaining good characteristics for a range of possible applications.

Isocyanate freeHigh performanceFlexible resinExcellent hardness stability over a wide temperature range (-70 °C to 110°C)Flexible at temperature extremesLow moisture sensitivity during and after cureExhibits excellent electrical propertiesSoft, Dig-outable, aids ease of rework

26 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
27,51
(excl. BTW)
33,29
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 27,51
15 - 39
€ 26,42
40 +
€ 25,34
Related Products
This thermal grease adhesive provides an excellent heat ...
Description:
This thermal grease adhesive provides an excellent heat transfer between semiconductor devices and heat sinks. It is based on a silicone oil and therefore offers a wide operating temperature range and excellent stability at high temperatures.Improves electrical isolation when used ...
Electrolube HTCX is an enhanced version of HTC ...
Description:
Electrolube HTCX is an enhanced version of HTC featuring improved thermal conductivity, lower oil bleed, and lower evaporation weight loss. HTCX is recommended where the efficient and reliable thermal coupling of electrical and electronic components is required or between any ...
Easy-Clene Micro-fibre cloth was specifically developed to provide ...
Description:
Easy-Clene Micro-fibre cloth was specifically developed to provide a cleaning solution for the more delicate tasks around the office. Used wet or dry, they remove grease, dust and finger marks to leave a sparkling clean finish.
A non silicone heat transfer compound containing various ...
Description:
A non silicone heat transfer compound containing various metal oxide (ceramic) powders which give exceptional thermal conductivity. Excellent non creep characteristicsExcellent thermal conductivity even at high temperaturesEasy to handleLow evaporation weight lossWhite colour for ease of identification in ...