- RS-stocknr.:
- 196-4725
- Fabrikant:
- RS PRO
- RS-stocknr.:
- 196-4725
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
- Land van herkomst:
- GB
Productomschrijving
RS PRO 1.5 μF Polypropylene Capacitor PP 440 V AC ±10% Tolerance Screw Mount
Use this RS PRO capacitator to help spin single-phase induction motors. Suited to AC voltage, it works by providing a jolt of stored energy to the motor once it has started.
Two very thin layers of aluminium film covered in a polyurethane flame-retardant resin make up this polypropylene capacitator (PP). This insulated film gives the component the capacity to be self-healing through any weak points, which also absorb currents in case of a power surge. If this does occur, the metallised surface will melt, producing a vapour that insulates the weak spot and letting the capacitator carry on working normally. It's suitable for screw mounting and has a capacitance of 1.5 μF.
This product is typically found in the motors of domestic electrical appliances. It is British, European and ISO 9001-2008 quality approved.
Two very thin layers of aluminium film covered in a polyurethane flame-retardant resin make up this polypropylene capacitator (PP). This insulated film gives the component the capacity to be self-healing through any weak points, which also absorb currents in case of a power surge. If this does occur, the metallised surface will melt, producing a vapour that insulates the weak spot and letting the capacitator carry on working normally. It's suitable for screw mounting and has a capacitance of 1.5 μF.
This product is typically found in the motors of domestic electrical appliances. It is British, European and ISO 9001-2008 quality approved.
Features and Benefits
Screw-mounting PP (polypropylene) capacitor
Dissipation factor of 0.15%
Capacitance of 1.5 μF
PLYP dielectric type
Length of 56 mm
Diameter of 30 mm
Operating temperature range of -25°C to +85°C
BS, EN ISO 9001-2008 approved
RoHS (Restriction of Hazardous Substances) compliant
Dissipation factor of 0.15%
Capacitance of 1.5 μF
PLYP dielectric type
Length of 56 mm
Diameter of 30 mm
Operating temperature range of -25°C to +85°C
BS, EN ISO 9001-2008 approved
RoHS (Restriction of Hazardous Substances) compliant
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Specificaties
Kenmerk | Waarde |
---|---|
Capacitance | 1.5µF |
Voltage | 440V ac |
Mounting Type | Screw Mount |
Tolerance | ±10% |
Series | MRP440 |
Length | 56mm |
Dimensions | 30 (Dia.) x 56mm |
Dielectric | Polypropylene |
Terminal Type | Screw Mount |
Maximum Operating Temperature | +85°C |
Minimum Operating Temperature | -25°C |
Dissipation Factor | <0.15% |