Hi-Force Single, Portable Low Height Hydraulic Cylinder, HPS100, 10T, 10mm stroke

  • RS-stocknr. 808-078
  • Fabrikantnummer HPS100
  • Fabrikant Hi-Force
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Low Height Pad Cylinders-High Pressure

Combine minimum collapsed height with optimum stroke
They provide a short adjusting and lifting force in confined work areas
Steel stop rings further increase the cylinders capacity to withstand side loads and restrain the piston at full extension

//media.rs-online.com/t_line/L808056-01.gif

Low Height Cylinders

High quality single acting, spring return cylinders, manufactured from high strength alloy steels, and providing a minimum safety factor of 3:1
Piston rods are chrome plated to prevent corrosion and the use of pressure activated anti-extrusion seals, enhance performance and reliability
Heavy duty return springs, assist single acting pistons to retract fully. Steel stop rings further increase a cylinders capacity to withstand side loads and restrain the piston at full extension
All port connections are 3/8 in. NPT and each cylinder is fitted with a high flow, quick release, female half coupler as standard
All cylinders are individually tested to 125% of their working pressures and are issued with a manufacturers test certificate, and instruction leaflet
The capacities of all our range of high pressure cylinders are specified at a working pressure of 700 bar
For suitable oil see technical specification of Hydraulic Hand Pumps
Maintenance seal kits are available separately

Warning

  • Safety Note - High pressure hydraulic equipment can work at extremely high pressures and careful attention should be paid to working pressures when choosing accessories.
Specificaties
Kenmerk Waarde
Manufacturer Series HPS
Single/Double Acting Single
Capacity 10t
Stroke 10mm
Closed Height 45mm
Extended Height 55mm
Cylinder Effective Area 14.4cm²
Oil Capacity 14cm³
Outside Diameter 81mm
Maximum Operating Pressure 700 bar
Weight 1.6kg
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
318,27
(excl. BTW)
385,11
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 318,27
Related Products
Hydraulic cylinders with a range of bore sizes ...
Description:
Hydraulic cylinders with a range of bore sizes and stroke lengths for general purpose and light duty applications. Manufactured to ISO 3320 and compatible with ISO mounting styles and fixings. Carbon steel bodyRecommended hydraulic medium: Mineral oil based fluidsNBR (Nitrile)/Polyurethane ...
Single acting, spring returnFor use when a large ...
Description:
Single acting, spring returnFor use when a large stroke is required for a spreading applicationFitted with a female high flow couplerRequires a high pressure pump and hose link, available separately.
The through-bore piston design offers the user flexibility ...
Description:
The through-bore piston design offers the user flexibility when selecting equipment to provide a pulling force. This range of cylinders can also be used in the pushing modeThe replacement saddle is threaded to screw into the threaded counter-bore of the ...
Enerpac RS-Series Hydraulic Cylinders are fitted with the ...
Description:
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation.