Enerpac Single, Portable Low Height Hydraulic Cylinder, RSM50, 5T, 6mm stroke

  • RS-stocknr. 283-0982
  • Fabrikantnummer RSM50
  • Fabrikant Enerpac
Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Flat - Low Height Cyllinders

Compact, flat profile, RSM-Flat Jac® spring return cylinders designed for use in extremely confined working spaces where most other cylinders will not fit
Mounting holes permit easy fixing
Grooved plunger end requires no saddle
Replacement seal kits are available

Note

All cylinder capacities are specified in US ton (short ton). 1 US ton = 907.2Kg

//media.rs-online.com/t_line/L283098-01.gif
//media.rs-online.com/t_line/LF283098-10.gif

Low Profile Cylinders

Industrial standard high quality single acting/spring return cylinders manufactured from durable high strength alloy steel with a Baked Enamel finish. The plunger is chrome plated to resist wear and rust. The saddles are hardened which prevents the piston from jamming in the top bearing and heavy-duty return springs enable fast piston retraction. Port connections on all cylinders are 3/8-18 NPT and are fitted with a female high flow coupler. Enerpac cylinders are designed to ANSI B30.1 and have a maximum operating pressure of 700 bar.

Specificaties
Kenmerk Waarde
Manufacturer Series RSM
Single/Double Acting Single
Capacity 5t
Stroke 6mm
Closed Height 32mm
Extended Height 38mm
Cylinder Effective Area 6.5cm²
Oil Capacity 4cm³
Outside Diameter 58 x 41mm
Maximum Operating Pressure 700 bar
Weight 1kg
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
14 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
287,73
(excl. BTW)
348,15
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 287,73
Related Products
The Festo stroke of the bellows cylinder can ...
Description:
The Festo stroke of the bellows cylinder can be made to carry out a circular path, in which case the indicated tilt angle á must not be exceeded. During setup the minimum height must be observed, and that the maximum ...
Hydraulic cylinders with a range of bore sizes ...
Description:
Hydraulic cylinders with a range of bore sizes and stroke lengths for general purpose and light duty applications. Manufactured to ISO 3320 and compatible with ISO mounting styles and fixings. Carbon steel bodyRecommended hydraulic medium: Mineral oil based fluidsNBR (Nitrile)/Polyurethane ...
Single acting cylinder pump-sets for lifting and push ...
Description:
Single acting cylinder pump-sets for lifting and push applications. The kit comes with a two-speed hand-pump which can reduce the required number of handle strokes by up to 78. The two-speed pump also requires less effort than a single speed ...
Single acting cylinder pump-sets for lifting and push ...
Description:
Single acting cylinder pump-sets for lifting and push applications. The kit comes with a two-speed hand-pump which can reduce the required number of handle strokes by up to 78. The two-speed pump also requires less effort than a single speed ...