Enerpac Single, Portable General Purpose Hydraulic Cylinder, RC254, 25T, 102mm stroke

  • RS-stocknr. 750-2711
  • Fabrikantnummer RC254
  • Fabrikant Enerpac
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Single-Acting, General Purpose

Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation.

Cylinders are manufactured from durable high strength alloy steel, incorporate heavy-duty return springs and are finished in a baked enamel paint coat. CR-400 couplers and a dust cap is included on all Enerpac cylinder models, and cylinder life is extended through the use of plunger wipers, which reduces internal contamination. Enerpac cylinders are designed to be used in any position.

Collar and plunger threads and base mounting holes (available on most models) enable the cylinders to be easily fixed in place. Replacement saddles are also available (for example: 283-0954 for 10 t Enerpac units).

Note

Cylinder RC50 (stock no. 283-0780) has a non-removable grooved saddle and no collar thread.
All cylinder capacities are specified in US ton (short ton). 1 US ton = 907.2kg

Cylinders

Industrial standard high quality single acting/spring return cylinders manufactured from durable high strength alloy steel with a Baked Enamel finish. The plunger is chrome plated to resist wear and rust. The saddles are hardened which prevents the piston from jamming in the top bearing and heavy-duty return springs enable fast piston retraction. Port connections on all cylinders are 3/8-18 NPT and are fitted with a female high flow coupler. Enerpac cylinders are designed to ANSI B30.1 and have a maximum operating pressure of 700 bar.

Specificaties
Kenmerk Waarde
Manufacturer Series RC
Single/Double Acting Single
Capacity 25t
Stroke 102mm
Closed Height 215mm
Extended Height 317mm
Cylinder Effective Area 33.2cm²
Oil Capacity 339cm³
Outside Diameter 85mm
Maximum Operating Pressure 700 bar
Weight 8.2kg
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
723,47
(excl. BTW)
875,40
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 723,47
Related Products
For lifting and pushing applications where flexibility and ...
Description:
For lifting and pushing applications where flexibility and high cycle requirements existNon-metallic bearings on the piston rod and the stop ring provide excellent wear resistance with low friction and high side load bearing capacity. Suitable for use in a diverse ...
Single acting cylinder pump-sets for lifting and push ...
Description:
Single acting cylinder pump-sets for lifting and push applications. The kit comes with a two-speed hand-pump which can reduce the required number of handle strokes by up to 78. The two-speed pump also requires less effort than a single speed ...
Single acting hollow plunger pump-sets for lifting, push ...
Description:
Single acting hollow plunger pump-sets for lifting, push and pull applications. The kit comes with a two-speed hand-pump which can reduce the required number of handle strokes by up to 78. The two-speed pump also requires less effort than a ...
Enerpac RS-Series Hydraulic Cylinders are fitted with the ...
Description:
Enerpac RS-Series Hydraulic Cylinders are fitted with the exclusive Golden Ring design - a unique bearing design - which absorbs eccentric loads to protect the cylinder against abrasion, over-extension, and jamming for long, trouble-free operation.