Vishay 533 Series Wirewound Potentiometer with a 6.35 mm Dia. Shaft 3-Turn, 10kΩ, ±5%, 1W, ±20ppm/°C, Panel Mount

  • RS-stocknr. 460-1893
  • Fabrikantnummer 533B1103JL
  • Fabrikant Vishay
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

Vishay 533 Series Wirewound Potentiometers - 3 Turns

• Bushing and servo mount designs available
• Linearity ± 0.25 %, down to 0.05 % on request
• Special resistance tolerances to 1 %
• Rear shaft extensions and support bearing
• Metric shaft available
• Dual gang configuration and concentric shafts
• High torque, center tap, slipping clutch on request
• Special markings and front shaft extensions
• Material categorization: for definitions of compliance

Supplied with

Metal lockwasher and nut.

//media.rs-online.com/t_line/LF166442-10.gif
//media.rs-online.com/t_line/LI166442-10.gif

Precision - Multi-Turn and Servo

Specificaties
Kenmerk Waarde
Maximum Resistance 10 kΩ
Number of Turns 3
Potentiometer Type Linear
Mounting Type Panel Mount
Shaft Diameter 6.35 mm
Power Rating 1W
Termination Style Solder Lug
Tolerance ±5%
Series 533
Length 39.67mm
Depth 22.23mm
Height 26.99mm
Dimensions 39.67 x 22.23 x 26.99mm
Maximum Operating Temperature +125°C
Minimum Operating Temperature -55°C
Temperature Coefficient ±20ppm/°C
22 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
265 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
11,20
(excl. BTW)
13,55
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 11,20
10 - 49
€ 10,81
50 - 99
€ 10,08
100 - 249
€ 9,82
250 +
€ 9,58
Verpakkingsopties
Related Products
Ohmite resistor Thru-Bolts, along with centering washers and ...
Description:
Ohmite resistor Thru-Bolts, along with centering washers and mica insulating washers, permit perpendicular mounting of series 200, 210 and 270 type resistors to panels up to 0.25" thick.
Vishay’s range of high quality rotary potentiometers bring ...
Description:
Vishay’s range of high quality rotary potentiometers bring you the best build quality with a stainless steel shaft and solder lug terminals. With durability in mind the 534 series are rated for over one million lifecycles and are suitable for ...
• Bushing and servo mount designs available• Linearity ...
Description:
• Bushing and servo mount designs available• Linearity ± 0.25 %, down to 0.05 % on request• Special resistance tolerances to 1 %• Rear shaft extensions and support bearing• Metric shaft available• Dual gang configuration and concentric shafts• High torque, ...
The 25L series has a life expectancy of ...
Description:
The 25L series has a life expectancy of 100,000 cycles making them extremely cost effective to similar designs. They have also been manufactured to ISO 9001 standards. All standard switches are continuous rotation and there is a wide selection available ...