Electrolube ER2195RP250G Black Flame Retardant Epoxy Potting Compound

  • RS-stocknr. 164-315
  • Fabrikantnummer ER2195RP250G
  • Fabrikant Electrolube
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

ER2195 - Black, Flame Retardant, GP Epoxy Resin

Two part epoxy resin potting and encapsulating compound supplied in handy 250g ’duo-sachet’ pack for easy mixing and pouring with no mess.With long pot life and cure times this resin is designed for general purpose use. The cured product exhibits a high degree of toughness and adhesion and is particularly suited to applications with stringent temperature cycling or thermal shock requirements. The flame retardant technology used is of a clean type leading to relatively low toxicity fumes and low smoke emission. (see ER1448 for typical application images)

Features and Benefits

Excellent electrical properties
Flame retardant - approved to UL94 V-0
Usable, pot life 4 hours @ 20°C
Cure time 36 hours @ 25°C
Operating temperature -40 to 130°C
Excellent adhesion to a wide variety of substrates
Low shrinkage and exothermic properties
Good chemical and water resistance
Non toxic
Semi rigid

Approvals

UL

Approvals

UL

Specificaties
Kenmerk Waarde
Product Material Epoxy
Package Type Pack
Package Size 250 g
Special Properties Flame Retardant
Cure Time 36 h
Hardness 80 Shore D
Thermal Conductivity 0.45W/mK
Colour Black
Maximum Operating Temperature +130°C
Minimum Operating Temperature -40°C
Operating Temperature Range -40 → +130 °C
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each
15,41
(excl. BTW)
18,65
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 15,41
6 - 14
€ 14,79
15 +
€ 14,48
Related Products
The Kontakt Chemie heat sink compound is an ...
Description:
The Kontakt Chemie heat sink compound is an excellent choice for your PCBs, control assemblies and electronic components. The thermal paste helps improve the thermal connection of your processors. • Specific gravity of 2.3• Excellent moisture buffer• High thermal conductivity• ...
Q-Sil 553 is 2-component, addition-cure, thermally conductive silicone ...
Description:
Q-Sil 553 is 2-component, addition-cure, thermally conductive silicone elastomer system. It has been specially designed for electronic assembly potting applications. The fully cured elastomer offers good protection against shock, vibration and environmental contamination and is UL 94V0 approved. The twin ...
Casting compound for encapsulating electronic assembliesVibration isolation and ...
Description:
Casting compound for encapsulating electronic assembliesVibration isolation and prevention of stress exposureER 2074 RS stock no. 160-8469 — very high thermal transfer properties (thermal conductivity of 1.26W/mK)Entirely free of grinding fillersLow heat emission upon hardeningAt a storage or transport temperature ...
Ideal for potting electrical and electronic components and ...
Description:
Ideal for potting electrical and electronic components and sub-assembliesHard, high gloss finish gives permanent (non repairable) environmental protectionSlight flexibility permits thermal expansion without stressLow exothermic temperature rise protects components during curingCure time: 24 hours @25°C. Cure may ...