Tele Power Control, Digital Input, 16 A

  • RS-stocknr. 123-9764
  • Fabrikantnummer TST01-16/230
  • Fabrikant Tele
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

TST01 Thyristor Stack

TST01 Series Thyristor stack designed for resistive and inductive loads with phase angle controlled firing. The power controllers are compact with PA-firing, built in a rugged aluminium casing for easy handling and mounting. To save wiring time and costs, the auxiliary supply is produced internally from the mains supply.
Due to the low-power generation dissipation of 0.9 W/A load current and standby power consumption of 0.2 W, the Thyristor stacks offer a highly efficient device that reduces cooling power for your cabinets.

Features and Benefits

• Single phase, fully controlled firing for heating and drive applications
• Slim, compact build (45 mm)
• Solid aluminium case
• Internal auxiliary supply
• Isolated 0-10 V control input
• Digital input: start/enable
• Output relay: temperature alarm
• Lower power dissipation 0.9 W/A load current
• Controlled fan for long lifetime
• DIN Rail mounting

Applications

• Continuous control of industrial heaters
• Control for short wave infrared lamps
• Ballast -/ load-control for solar, wind and hydraulic power plants
• Packaging machines, vacuum forming machines, blow forming machines
• Drying plants and gluing machines
• Dental furnaces, ceramic furnaces
• Power control for fans and small pumps
• Laboratory and education application

Specificaties
Kenmerk Waarde
Control Type 1 Phase
Function Heater Controller
Input Type Digital
Maximum Current 16 A
Length 45mm
Width 126mm
Height 97mm
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
5 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
242,31
(excl. BTW)
293,20
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 242,31
Related Products
The RGC1P series of power controllers are supplied ...
Description:
The RGC1P series of power controllers are supplied with integrated heatsink and are used to control output power of single phase loads with an analogue control input. Switching modes are selectable using a knob on the front of the controller ...
EPack Series 3-phase power controllers from Eurotherm are ...
Description:
EPack Series 3-phase power controllers from Eurotherm are designed to control a wide range of loads in various applications. Even if the loads are unbalanced, the control of each phase ensures complete and accurate control. The power controller has a ...