Carlo Gavazzi Power Control, Analog Input Input, 43 A

  • RS-stocknr. 125-0690
  • Fabrikantnummer RGC1P23V42ED
  • Fabrikant Carlo Gavazzi
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MT
Productomschrijving

RGC1P Series SSR Power Controllers

The RGC1P series of power controllers are supplied with integrated heatsink and are used to control output power of single phase loads with an analogue control input. Switching modes are selectable using a knob on the front of the controller and allows phase angle control, full cycle control, advanced full cycle control and soft starting.
The output of the RGC1P power controllers is protected against overvoltages by an integrated varistor across the output.

Features and Benefits

• 1-pole analogue switching AC solid-state contactors
• Integrated heatsink
• Selectable modes of operation;
- Phase angle
- Full cycle x1, x4 or x16
- Advanced full cycle specific for short wave infrared heaters
- Soft starting for limiting inrush current of loads having a high temperature coefficient
• Rated operational voltage up to 660 V ac
• Rated operation current up to 63 A ac
• Control inputs: 4-20 mA, 0-5 V, 1-5 V, 0-10 V, external potentiometer
• Integrated varistor protection on output
• 2 Front LEDs indicate status of load and control
• 100 kA short circuit current rating according to UL508
• DIN Rail or panel mounting

Specificaties
Kenmerk Waarde
Function Heater Controller
Input Type Analog Input
Maximum Current 43 A
Length 35.8mm
Width 103.5mm
Height 110mm
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
18 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
101,73
(excl. BTW)
123,09
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 101,73
Related Products
The universal temperature controller KS 40-1 is intended ...
Description:
The universal temperature controller KS 40-1 is intended for universal, precise, and cost-effective control tasks in all branches of industry. For this, the unit provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control. The process value signal ...
The universal KS 50-1 temperature controller is intended ...
Description:
The universal KS 50-1 temperature controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary ...
Set up to 8 programmed patterns with up ...
Description:
Set up to 8 programmed patterns with up to 32 segments (steps) eachHigh-resolution display with 5 digits/0.01°C displayHigh-speed sampling cycle of 60 msThermocouple/Pt input: ±0.1% of PVAnalogue input: ±0.1% FSUniversal inputs on all models (thermocouple, PT, or analog input) to ...
Up to 8 programmed patterns can be set ...
Description:
Up to 8 programmed patterns can be set with up to 32 segments (steps) eachHigh-resolution display with 5 digits/0.01°C display High-speed sampling cycle of 60 ms.Thermocouple/Pt input: ±0.1% of PVAnalogue input: ±0.1% FSUniversal inputs (thermocouple, PT, or analog input) to ...